I see everything (normal booting) when it is in baud rate 9600, when it gets to: Press RETURN to get started, I hit enter and nothing happens. This made me think it could be the speed, I turned on the swtich - Press the mode button - It comes to switch: mode and I hit enter and nothing happens. I changed all the baud rate that are possible and I see odd symbols. Sent from HP Slate 7
Matt Hill <[email protected]> wrote: Are you seeing any output from the console at all? Including complete rubbish text and odd symbols? Cheers, Matt CCIE #22386 CCSI #31207 On 10 Nov 2013, at 5:47 am, Bob McCouch <[email protected]> wrote: > Ensure all flow control is OFF in SecureCRT session settings. I've found some > devices don't respond to keyboard if XON/XOFF is enabled. > > Or try PuTTY, that seems to default correctly. > > Bob > -- > Sent from my iPhone, please excuse any typos. > >> On Nov 9, 2013, at 1:41 PM, Wilberth E. Lemaître >> <[email protected]> wrote: >> >> Hi Joe, I have tried all the Baud rate, from 110 to 921600 and nothing, with >> the rest of the baud rate I see yyyyyyyy or any other strange symbol, I only >> can read properly what is on the screen with the baud rate of 9600. >> >>> Date: Sat, 9 Nov 2013 12:35:23 -0600 >>> Subject: Re: [OSL | CCIE_RS] Console problem with 3550 >>> From: [email protected] >>> To: [email protected]; [email protected] >>> >>> Try 2400 , I seem to recall a time when this happened to me and I had to >>> recover my 3550 and the only baud that would work is the 2400; I cannot >>> explain it, but I was able to recover my switch using that baud. >>> >>> >>> Best Regards, >>> Joe Sanchez >>> >>> >>> >>> >>> >>> >>> On 11/9/13, 12:22 PM, "Wilberth E. Lemaître" <[email protected]> >>> wrote: >>> >>>> Hello Community, >>>> I am having a strange issue with my Switch 3550. I updated the IOS and I >>>> changed the Console BAUD to 115200 then I put it back to 9600 when the >>>> upgrade was successful. I turned it on ago normally and now either 115200 >>>> or 9600 speed is not working, I tried SecureCRT, putty, I changed the >>>> console cable, everything. The weirdest thing is that when I set the >>>> speed in 9600 in SecureCRT or putty, I can see while the switch boots up >>>> which means the switch is working perfectly but when it says press RETURN >>>> to get started I hit enter and nothing happens, absolutely nothing. I >>>> broke out the boot process to delete the config.txt because sometimes >>>> the speed console changes when you do an upgrade or whatever via the >>>> console, but this time not even in switch: mode is letting me hit enter. >>>> I know the switch is working properly because if I connect a cable to >>>> f0/0 I can see the logging message on my screen when it comes up (this is >>>> in 9600 speed in SecureCRT) Now, is there any other way t >>>> o reset the BAUD of the console? Any other idea to get into the switch? >>>> Or if this is a bug, how can it be solved? >>>> Best regards,Wilberth >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, please >>>> visit www.ipexpert.com >>>> >>>> Are you a CCNP or CCIE and looking for a job? Check out >>>> www.PlatinumPlacement.com >>>> >>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
