Ensure all flow control is OFF in SecureCRT session settings. I've found some devices don't respond to keyboard if XON/XOFF is enabled.
Or try PuTTY, that seems to default correctly. Bob -- Sent from my iPhone, please excuse any typos. > On Nov 9, 2013, at 1:41 PM, Wilberth E. Lemaître <[email protected]> > wrote: > > Hi Joe, I have tried all the Baud rate, from 110 to 921600 and nothing, with > the rest of the baud rate I see yyyyyyyy or any other strange symbol, I only > can read properly what is on the screen with the baud rate of 9600. > >> Date: Sat, 9 Nov 2013 12:35:23 -0600 >> Subject: Re: [OSL | CCIE_RS] Console problem with 3550 >> From: [email protected] >> To: [email protected]; [email protected] >> >> Try 2400 , I seem to recall a time when this happened to me and I had to >> recover my 3550 and the only baud that would work is the 2400; I cannot >> explain it, but I was able to recover my switch using that baud. >> >> >> Best Regards, >> Joe Sanchez >> >> >> >> >> >> >> On 11/9/13, 12:22 PM, "Wilberth E. Lemaître" <[email protected]> >> wrote: >> >>> Hello Community, >>> I am having a strange issue with my Switch 3550. I updated the IOS and I >>> changed the Console BAUD to 115200 then I put it back to 9600 when the >>> upgrade was successful. I turned it on ago normally and now either 115200 >>> or 9600 speed is not working, I tried SecureCRT, putty, I changed the >>> console cable, everything. The weirdest thing is that when I set the >>> speed in 9600 in SecureCRT or putty, I can see while the switch boots up >>> which means the switch is working perfectly but when it says press RETURN >>> to get started I hit enter and nothing happens, absolutely nothing. I >>> broke out the boot process to delete the config.txt because sometimes >>> the speed console changes when you do an upgrade or whatever via the >>> console, but this time not even in switch: mode is letting me hit enter. >>> I know the switch is working properly because if I connect a cable to >>> f0/0 I can see the logging message on my screen when it comes up (this is >>> in 9600 speed in SecureCRT) Now, is there any other way t >>> o reset the BAUD of the console? Any other idea to get into the switch? >>> Or if this is a bug, how can it be solved? >>> Best regards,Wilberth >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
