I can see the precedence files inside: C:\Program Files\Cisco\TFTPPath\English_United_States
File names start with ANNMLPP*.wav Date: Wed, 4 Feb 2009 23:16:14 -0600 Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable? From: ryanstudyvo...@gmail.com To: kapilatr...@hotmail.com CC: lovingprin...@gmail.com; ccie_voice@onlinestudylist.com; gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com Any idea where the precedence wav file is located? On Tue, Feb 3, 2009 at 11:59 PM, Kapil Atrish <kapilatr...@hotmail.com> wrote: Yup, you are right. Those are not under English_United States folder. You'll find ANN_Fastbusy.wav inside the path you;ve mentioned. So I believe it is correct. Date: Tue, 3 Feb 2009 19:50:22 -0600 Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable? From: ryanstudyvo...@gmail.com To: lovingprin...@gmail.com CC: kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com; gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com Where are the Blocked pattern reason codes greeting stored at? Are they under program files>cisco>tftpath>united states On Tue, Feb 3, 2009 at 12:46 AM, kamal yousaf <lovingprin...@gmail.com> wrote: Yeah..I did that but putting DN didn't work.You would need Secondary AC pilot #. Besides, I prefer to use Unity rather than going through this method.At least for lab, it won't be advisable unless strictly asked to do so. On Tue, Feb 3, 2009 at 5:02 PM, Kapil Atrish <kapilatr...@hotmail.com> wrote: Cool...I did not check for the TCD Service Parameter. I think if I set this parameter the second AC would not be required. I may simply put a DN as "Always route member" to extend fast busy to caller after initial MOH. Otherwise I'll also follow your solution. Vik/Mark: Do you think it is an acceptable solution? Question is to customize annunciator and we are using MOH to acheive the results? Date: Tue, 3 Feb 2009 15:39:43 +1100 Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable? From: lovingprin...@gmail.com To: kapilatr...@hotmail.com CC: anthony.ye...@gmail.com; ccie_voice@onlinestudylist.com; gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com Kapil, If you dial your first AC pilot # , you should hear greeting .If you dial second(dummy) AC pilot # , you should hear user busy.Now, When you link 2nd to first,i.e add 2nd AC pilot # as Always Route Member , after hold time expires, call will be routed to dummy pilot point and you will get 'user busy'.I did also change Service Parameter for TCD so that AC can route calls to directory numbers with unknown state. Regds On Mon, Feb 2, 2009 at 9:25 PM, Kapil Atrish <kapilatr...@hotmail.com> wrote: Hi Kamal, I created additional AC Pilot with queuing disabled and pointed first one to the new AC as "Alwasy Route Member". I keep on getting the MOH from first AC even though queuing timer is over. Can you pl comment if you achieved it differently? I am able to route the call to a CTI_RP as "Alwasy Route Member" and point this RP to a route-pattern which further points it to the Gateway. The RP string is invalid and non-routable by the GW. Using this method, the caller simply gets dropped after queuing timer is over. No Fast-busy to caller but MOH gets played. When I try pointing AC "Always Route Member" filed to any Route-pattern directly, I get the following message: The Directory Number you entered in the selected Partition is associated with a device that can not be a member of a Hunt Group. Pl let me know how you achieved Anthony's method? Date: Thu, 29 Jan 2009 18:05:31 +1100 Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable? From: lovingprin...@gmail.com To: anthony.ye...@gmail.com CC: kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com; gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com I tested it and it works great.Thanks Anthony for kind help. On Thu, Jan 29, 2009 at 3:52 PM, Anthony Yeung <anthony.ye...@gmail.com> wrote: What you can try is assign a dummy AC pilot point to the original AC Pilot Point as the 'Always Route Member' creating a linked hunt group. Then for this second dummy AC pilot point assign a dummy AC user like you did w/ the first. But instead, disable queuing for this second dummy Pilot Point. After the hold time expires for the first AC pilot, the call will be forwarded to the second AC pilot. Since queuing is disabled, the call should drop BUT w/ a disconnect cause of 'user busy'. On Wed, Jan 28, 2009 at 11:15 AM, Kapil Atrish <kapilatr...@hotmail.com> wrote: > I did not put the TP directly inside the Hunt-Group. I put a CTIRP as > "Always Route Member" and on CTIRP I did a forward all to the TP. > > I am yet to try the solution given by Christian. I'll put the call to a > gateway via RP and see if I can get fast-busy to the caller after initial > queuing prompt. > > ________________________________ > Date: Tue, 27 Jan 2009 21:30:58 +1100 > Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable? > From: lovingprin...@gmail.com > To: kapilatr...@hotmail.com > CC: christian.hennr...@intact-is.com; gree...@googlemail.com; > ccie_voice@onlinestudylist.com; anil...@yahoo.com > > I tried same way.It plays greeting only once.I also changed service > parameter for Cisco TCD "Allow Routing with Unknown Line State" to True ,and > retried.Call still doesn't end. > > Kapil, > how did you add TP as member in HuntGroup.In my case, it gives error saying > that member should be a valid DN on system.I was able to add phone/CTIRP DNs > though. > > On Tue, Jan 27, 2009 at 8:48 PM, Kapil Atrish <kapilatr...@hotmail.com> > wrote: > > I tried with RP/TP >> Block this pattern and in that case call stays in > queue. AC takes the call out of the queue only when it is routed to a > registered end-point that's what I've observed. > > I'll try to route it to some unallocated number pointing it to the GW and > see if it works. > > Thanks for the input. > > >> Date: Tue, 27 Jan 2009 10:39:31 +0100 >> From: christian.hennr...@intact-is.com >> To: kapilatr...@hotmail.com >> CC: gree...@googlemail.com; anil...@yahoo.com; cpar...@cparker.us; >> ccie_voice@onlinestudylist.com >> Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be >> acceptable? >> >> what about routing to a number CUCM, which does not exist, or even to a >> PSTN number, which is unallocated? >> >> Christian >> >> Kapil Atrish schrieb: >> > The requirement is to drop the call within CCM itself. I don't want to >> > use Unity/IPCCX/TCL for this purpose. >> > >> > ------------------------------------------------------------------------ >> > Date: Tue, 27 Jan 2009 09:16:49 +0000 >> > Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be >> > acceptable? >> > From: gree...@googlemail.com >> > To: anil...@yahoo.com >> > CC: christian.hennr...@intact-is.com; cpar...@cparker.us; >> > kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com >> > >> > Folks, >> > >> > To get the call to disconnect you can use do the following: >> > >> > Create a CTI RP cfwd all to voicemail. >> > >> > In VM create a CH with the extension number of the CTI RP and configure >> > the greeting to be blank and then after greeting send the caller to hang >> > up. >> > >> > In the ac hunt group config add the CTI RP as the always route member. >> > >> > In acconfig.bat for the annunicator ac pilot set the hold time to be >> > something other than 0 seconds.... >> > >> > After this time has passed the call will be forwarded to unity and >> > disconnected - you get a little bit of ringing as the call gets to unity >> > which I cant get rid of..... >> > >> > 2009/1/27 anil batra <anil...@yahoo.com> >> > >> > I too tried the way Kapil mentioned and faced same issue as he did. >> > The call from PSTN does it the announcement but the call never gets >> > disonncted, it seems the queue is holdin git for forever. Anyone >> > here has tested this and have some workaround please. >> > >> > --- On *Tue, 1/27/09, Kapil Atrish /<kapilatr...@hotmail.com>/* wrote: >> > >> > From: Kapil Atrish <kapilatr...@hotmail.com> >> > >> > Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be >> > acceptable? >> > To: christian.hennr...@intact-is.com, cpar...@cparker.us >> > Cc: ccie_voice@onlinestudylist.com >> > Date: Tuesday, January 27, 2009, 11:38 AM >> > >> > >> > Chris, >> > >> > Your suspicion is what I've in mind that's why I am trying to >> > avoid using Unity/IPCCX/TCL. >> > >> > I've tested AC workaround and its working for me but couple of >> > catches. First of all, the file is in form of MOH and not >> > annunciator which was the original requirement of the question. >> > Secondly, I am not able to disconnect the call. The message >> > keeps on playing until caller drops the call. >> > >> > >> > thanks, >> > Kapil Atrish >> > >> > > Date: Mon, 26 Jan 2009 18:57:28 +0100 >> > > From: christian.hennr...@intact-is.com >> > > To: cpar...@cparker.us >> > > CC: ryanstudyvo...@gmail.com; kapilatr...@hotmail.com; >> > ccie_voice@onlinestudylist.com >> > > Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it >> > be acceptable? >> > > >> > > Hi, >> > > >> > > what about having a MoH File, that is playing the message to >> > the caller. >> > > MoH file is played in the AC Hunt group with queueing >> > activated and no >> > > AC operators logged in. So you would use only CUCM to play >> > the message. >> > > >> > > I have not tested that idea, but it might be workable. >> > > >> > > As far as there is nothing stated, which prevents you from >> > using Unity, >> > > I would use Unity. >> > > >> > > Regards >> > > >> > > Chris Parker schrieb: >> > > > The only thing that makes me suspicious about using Unity >> > to play the >> > > > announcement is that this requirement was listed under the >> > Media >> > > > section. This leads me to believe they want you to use the >> > annunciator. >> > > > Otherwise wouldn't it be under the Voicemail/Unity section? >> > > > >> > > > Regardless I don't think you can do it any other way unless >> > you hairpin >> > > > the call through Unity to send the call to the annunciator >> > since the VM >> > > > ports are skinny registrations. >> > > > >> > > > Chris >> > > > >> > > > Ryan Trauernicht wrote: >> > > > > That is what I thought.... but I opened a TAC case and >> > they claim you >> > > > > can, but cant figure out how. >> > > > > >> > > > > Thanks, >> > > > > Ryan Trauernicht >> > > > > >> > > > > On Mon, Jan 26, 2009 at 3:21 AM, Juan <juan.c...@gmail.com >> > > > > <mailto:juan.c...@gmail.com>> wrote: >> > > > > >> > > > > I remember reading in the SRND that you can only engage the >> > > > > annunciator for SCCP devices if I remember correctly - so >> > not to >> > > > > the PSTN. >> > > > > >> > > > > >> > > > > cheers, >> > > > > Juan >> > > > > >> > > > > >> > > > > On Sun, Jan 25, 2009 at 5:48 PM, Ryan Trauernicht >> > > > > <ryanstudyvo...@gmail.com >> > <mailto:ryanstudyvo...@gmail.com>> wrote: >> > > > > >> > > > > Not sure why you are going through all that trouble and not >> > > > > just sending it to unity as a call handler and hang up after >> > > > > message played. >> > > > > >> > > > > I don't know how to play an ANN from a PSTN call, I have >> > > > > engaged TAC and they are still working on it and they can't >> > > > > even figure it out right now. >> > > > > >> > > > > Any ideas? >> > > > > >> > > > > Thanks, >> > > > > Ryan Trauernicht >> > > > > >> > > > > On Sun, Jan 25, 2009 at 3:42 AM, Kapil Atrish >> > > > > <kapilatr...@hotmail.com >> > <mailto:kapilatr...@hotmail.com>> wrote: >> > > > > >> > > > > Hi list, >> > > > > >> > > > > Following I did: >> > > > > >> > > > > Create a new MOH Audio Source using >> > > > > "AAExtnOutOfService.wav". Prompt available inside Wfavvid >> > > > > folder >> > > > > >> > > > > Create a TP covering all unassigned DNs for example: 11xx, >> > > > > do Called party Xform to 1155 >> > > > > >> > > > > Create a AC Pilot 1155, give any DP say: ANN_PSTN >> > > > > AC Hunt-Group>>Give any AC user. No need to login to >> > > > > Attendant Console. >> > > > > Run acconfig.bat>>Enable Queuing >> > > > > Inside DP: ANN_PSTN give User Hold MOH Source as >> > > > > "AAExtnOutOfService.wav". >> > > > > >> > > > > Now, whenever you dial any unassigned number withing range >> > > > > 11xx, you'll hear "AAExtnOutOfService.wav" but the problem >> > > > > is that I am not able to make the PSTN call drop. >> > > > > >> > > > > I tried routing calls to TP inside AC Hunt-Group>>Always >> > > > > Route member is TP>>TP has Block Pattern --Not working. >> > > > > >> > > > > "AAExtnOutOfService.wav"keeps on playing. >> > > > > >> > > > > I tried routing calls to Route-Point (Always Route Member) >> > > > > inside AC Hunt-Group>>CTI_RP has Forward all to TP>>TP has >> > > > > Block Pattern --Not working. "AAExtnOutOfService.wav"keeps >> > > > > on playing. >> > > > > >> > > > > I tried routing calls to a registered Phone DN as Always >> > > > > Route Member>>Forward all to TP>>>>TP has Block Pattern >> > > > > --Not working. "AAExtnOutOfService.wav"keeps on playing. >> > > > > >> > > > > Can someone help me achieve call drop here without using >> > > > > IPCCX/Unity/TCL? >> > > > > >> > > > > >> > > > > Thanks, >> > > > > Kapil Atrish >> > > > > >> > > > > >> > > > >> > ------------------------------------------------------------------------ >> > > > > Rediscover the magic of Windows & WIN a Windows Vista >> > > > > laptop & Windows mobile phone at www.windowsandme.com >> > > > > <http://www.windowsandme.com> Try it now! >> > > > > <http://www.windowsandme.com> >> > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > > >> > ______________________________________________________________________ >> > > > This email has been scanned by the MessageLabs Email >> > Security System. >> > > > For more information please visit >> > http://www.messagelabs.com/email >> > > > >> > ______________________________________________________________________ >> > > > >> > > > >> > ______________________________________________________________________ >> > > > This email has been scanned by the MessageLabs Email >> > Security System. >> > > > For more information please visit >> > http://www.messagelabs.com/email >> > > > >> > ______________________________________________________________________ >> > > > >> > >> > ------------------------------------------------------------------------ >> > Need more space to upload pictures? Get 25 GB online storage >> > with Windows Live SkyDrive! Try it! >> > >> > >> > >> > >> > ------------------------------------------------------------------------ >> > Discover your phone style & WIN a Windows Mobile phone. Your style! Try >> > it now! <http://www.whatsmyphonestyle.com> >> > ______________________________________________________________________ >> > This email has been scanned by the MessageLabs Email Security System. >> > For more information please visit http://www.messagelabs.com/email >> > ______________________________________________________________________ >> > >> > ______________________________________________________________________ >> > This email has been scanned by the MessageLabs Email Security System. >> > For more information please visit http://www.messagelabs.com/email >> > ______________________________________________________________________ >> > > ________________________________ > Akshay Kumar takes on the two reigning Bollywood Khans. Catch the action on > MSN Entertainment! Check it out! > > ________________________________ > Discover your phone style & WIN a Windows Mobile phone. Your style! Try it > now! Akshay Kumar takes on the two reigning Bollywood Khans. Catch the action on MSN Entertainment! Check it out! Rediscover the magic of Windows & WIN a Windows Vista laptop & Windows mobile phone at www.windowsandme.com Try it now! Need more space to upload pictures? Get 25 GB online storage with Windows Live SkyDrive! Try it! _________________________________________________________________ Find a better job. We have plenty. Visit MSN Jobs http://www.in.msn.com/jobs
