Sounds like a good idea Cliff.
BR2-RTR:
===========================
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR2-RTR
!
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin
warm-reboot
boot-end-marker
!
logging message-counter syslog
logging buffered 4096
!
no aaa new-model
memory-size iomem 20
clock timezone CET 1
clock summer-time CET recurring 1 Sun Apr 1:00 last Sun Oct 1:00
network-clock-participate wic 0
no network-clock-participate wic 1
!
dot11 syslog
ip source-route
!
!
ip cef
ip dhcp excluded-address 10.10.202.1 10.10.202.49
ip dhcp excluded-address 10.10.202.70 10.10.202.254
!
ip dhcp pool CME
network 10.10.202.0 255.255.255.0
option 150 ip 10.10.110.3
default-router 10.10.202.1
!
!
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
archive
log config
hidekeys
!
!
controller E1 0/0/0
!
controller E1 0/0/1
!
controller T1 0/1/0
channel-group 0 timeslots 1-24
!
!
!
!
!
interface Loopback0
ip address 10.10.110.3 255.255.255.255
ip ospf network point-to-point
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Service-Engine0/0
no ip address
shutdown
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/3/0
switchport trunk native vlan 200
switchport mode trunk
switchport voice vlan 400
!
interface FastEthernet0/3/1
shutdown
!
interface FastEthernet0/3/2
shutdown
!
interface FastEthernet0/3/3
shutdown
!
interface Serial0/1/0:0
no ip address
encapsulation frame-relay IETF
no fair-queue
frame-relay lmi-type ansi
!
interface Serial0/1/0:0.1 point-to-point
ip address 10.10.112.2 255.255.255.0
ip ospf mtu-ignore
snmp trap link-status
frame-relay interface-dlci 102
!
interface Vlan1
no ip address
!
interface Vlan200
ip address 10.10.102.1 255.255.255.0
!
interface Vlan400
ip address 10.10.202.1 255.255.255.0
!
router ospf 1
router-id 10.10.202.1
log-adjacency-changes
network 10.10.0.0 0.0.255.255 area 0
!
ip forward-protocol nd
!
ip http server
ip http authentication local
no ip http secure-server
!
!
!
!
!
tftp-server flash:P00307010100.bin
tftp-server flash:P003-8-12-00.bin
tftp-server flash:P003-8-12-00.sbn
tftp-server flash:P003-08-10-00.bin
tftp-server flash:P003-07-5-00.bin
tftp-server flash:P003-07-5-00.sbn
tftp-server flash:P003-08-10-00.sbn
tftp-server flash:P003-08-6-00.bin
tftp-server flash:P003-08-6-00.sbn
tftp-server flash:P003-08-7-00.bin
tftp-server flash:P003-08-7-00.sbn
tftp-server flash:P003-08-9-00.bin
tftp-server flash:P003-08-9-00.sbn
tftp-server flash:PHONE/7940-7960/P00308000500.bin alias P00308000500.bin
tftp-server flash:PHONE/7940-7960/P00308000500.loads alias P00308000500.loads
tftp-server flash:PHONE/7940-7960/P00308000500.sb2 alias P00308000500.sb2
tftp-server flash:PHONE/7940-7960/P00308000500.sbn alias P00308000500.sbn
tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.loads alias P0S3-08-6-00.loads
tftp-server flash:PHONE/7940-7960/P0S3-08-9-00.sb2 alias P0S3-08-6-00.sb2
tftp-server flash:PHONE/7940-7960/P003-08-9-00.bin alias P003-08-6-00.bin
tftp-server flash:PHONE/7940-7960/P003-08-9-00.sbn alias P003-08-6-00.sbn
!
control-plane
!
!
!
ccm-manager fax protocol cisco
!
mgcp fax t38 ecm
!
!
!
!
!
telephony-service
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 1
max-dn 1
ip source-address 10.10.110.3 port 2000
auto assign 1 to 1
network-locale ES
network-locale 1 ES
network-locale 2 ES
network-locale 3 ES
network-locale 4 ES
load 7960-7940 P003-08-9-00
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 19 2009 04:04:07
!
!
ephone-dn 1 dual-line
number 3001
!
!
ephone 1
no phone-ui speeddial-fastdial
no multicast-moh
mac-address 001B.D4C6.C136
codec g729r8
type 7960
button 1:1
!
!
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line 194
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
transport preferred none
transport input telnet
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
transport preferred none
transport input telnet
!
scheduler allocate 20000 1000
ntp server 10.10.100.2
end
==================================================
HQ-3750
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname HQ-3750
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
switch 1 provision ws-c3750-24p
system mtu routing 1500
ip subnet-zero
ip routing
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
interface FastEthernet1/0/1
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport mode trunk
!
interface FastEthernet1/0/2
switchport access vlan 10
switchport mode access
switchport voice vlan 20
spanning-tree portfast
!
interface FastEthernet1/0/3
!
interface FastEthernet1/0/4
switchport access vlan 30
switchport mode access
speed 100
duplex half
!
interface FastEthernet1/0/5
!
interface FastEthernet1/0/6
!
interface FastEthernet1/0/7
!
interface FastEthernet1/0/8
!
interface FastEthernet1/0/9
!
interface FastEthernet1/0/10
!
interface FastEthernet1/0/11
!
interface FastEthernet1/0/12
!
interface FastEthernet1/0/13
!
interface FastEthernet1/0/14
!
interface FastEthernet1/0/15
!
interface FastEthernet1/0/16
!
interface FastEthernet1/0/17
!
interface FastEthernet1/0/18
!
interface FastEthernet1/0/19
!
interface FastEthernet1/0/20
!
interface FastEthernet1/0/21
!
interface FastEthernet1/0/22
!
interface FastEthernet1/0/23
!
interface FastEthernet1/0/24
description *** DO NOT CHANGE - THIS IS YOUR L3 CONNECTION TO YOUR VPN!!! ***
switchport access vlan 10
switchport mode access
speed 100
duplex full
no cdp enable
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
!
interface Vlan1
no ip address
!
interface Vlan10
ip address 10.10.100.3 255.255.255.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.10.100.1
ip http server
no ip http secure-server
!
!
!
control-plane
!
!
line con 0
exec-timeout 0 0
logging synchronous
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
!
end
====================================
Here's some other output that may be helpful:
BR2-RTR# sh ephone
ephone-1[0] Mac:001B.D4C6.C136 TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:0
IP:10.10.202.51 51057 Unknown 0 keepalive 0 max_line 0
Preferred Codec: g729
BR2-RTR#
BR2-RTR#sh ip int brie
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 unassigned YES TFTP administratively
down down
Service-Engine0/0 unassigned YES TFTP administratively
down down
FastEthernet0/1 unassigned YES TFTP administratively
down down
FastEthernet0/3/0 unassigned YES unset up up
FastEthernet0/3/1 unassigned YES unset administratively
down down
FastEthernet0/3/2 unassigned YES unset administratively
down down
FastEthernet0/3/3 unassigned YES unset administratively
down down
Serial0/1/0:0 unassigned YES TFTP up up
Serial0/1/0:0.1 10.10.112.2 YES manual up up
Vlan1 unassigned YES TFTP up up
Vlan200 10.10.102.1 YES manual up up
Vlan400 10.10.202.1 YES manual up up
Loopback0 10.10.110.3 YES manual up up
BR2-RTR#
BR2-RTR#sh vlan-sw br
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
1 default active Fa0/3/1, Fa0/3/2, Fa0/3/3
200 DATA active
400 PHONES active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
BR2-RTR#
BR2-RTR#sh vlan-sw id 400
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
400 PHONES active Fa0/3/0
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
400 enet 100400 1500 - - - - - 0 0
BR2-RTR#sh vlan-sw id 200
VLAN Name Status Ports
---- -------------------------------- ---------
-------------------------------
200 DATA active Fa0/3/0
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
200 enet 100200 1500 - - - - - 0 0
BR2-RTR#
Bindings from all pools not associated with VRF:
IP address Client-ID/ Lease expiration Type
Hardware address/
User name
10.10.202.51 0100.1bd4.c6c1.36 Jun 20 2009 04:21 AM Automatic
BR2-RTR#
BR2-RTR#sh cdp nei f0/3/0 det
-------------------------
Device ID: SEP001BD4C6C136
Entry address(es):
IP address: 10.10.202.51
Platform: Cisco IP Phone 7960, Capabilities: Host
Interface: FastEthernet0/3/0, Port ID (outgoing port): Port 1
Holdtime : 166 sec
Version :
P003-08-9-00
advertisement version: 2
Duplex: full
Power drawn: 6.300 Watts
BR2-RTR#
BR2-RTR#sh int f0/3/0 switchport
Name: Fa0/3/0
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 200 (DATA)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1,200,400
Protected: false
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: 400
Appliance trust: none
BR2-RTR#
Quoting Cliff McGlamry <cl...@mcglamry.net>:
Why don't you post the full config of both the router and the switch?
Let's get some eyes on it.