The problem with imap is that you cannot use the mailbox of the company
(exchange) u have to setup an IMAP account for each user and users will
have a separate mailbox for voicemail.
So voicemail will go to us...@10.10.202.2 <mailto:us...@10.10.202.2>
you don't neet to add any thing
On 06/07/2010 12:54 PM, Ashar Siddiqui wrote:
Thanks Kerboute.
So let's say user has an email address us...@company.com
<mailto:us...@company.com>...
You said that now we will have to create a separate IMAP account for
each user (customer has 40 users -- that means 40 IMAP accounts)..
Now when a voicemail is left, will it go to us...@company.com
<mailto:us...@company.com> or us...@10.10.202.2
<mailto:us...@10.10.202.2>....
Also do I have to add this command at CUE
_session security mixed_
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 12:43
*To:* Ashar Siddiqui
*Cc:* ccie_voice@onlinestudylist.com; 'Angel Perez'
*Subject:* Re: [OSL | CCIE_Voice] Setting up Voicemail to send Email -
CME/CUE 7.0
You don't need to setup any thing on exchange server, cuz CUE doesn't
support unified messaging is like unity connection but you can
configure client "create a new imap account on outlook or Lotus" to
receive email from unity express, in this scenario CUE is the SMTP server.
So what you need now after doing the step just configue an IMAP
account on outlook with email address like usern...@ip_address-cue for
example us...@10.10.202.2 <mailto:us...@10.10.202.2>, the imap server
is unity express (u don't have to specify the smpt server) then try to
leave voicemail for the user1 and check on your outlook client if u
receive the email from unity express.
I hope this will help
Naoufal
On 06/07/2010 12:29 PM, Ashar Siddiqui wrote:
Thanks guys.
After doing those steps Kerboute, do I have to do anything under CUE
GUI? Like enabling messaging, configuring subscriber email addresses
etc? How the voicemail will reach to their email address?
I don't have visibility/access to their Email server..What I have to
tell them to make this work..any settings on Exchange server?
Also I was reading this doc
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/administration/guide/voicemail/12advVM.html#wp1025255
Over here it says "The system must have a default security certificate
and private key installed before SSL connections are permitted on
Cisco Unity Express. Use the show crypto key
<http://www.cisco.com/en/CCIMO/TD/-Migration/voice_ip_comm/CUE%20Command%20Ref/s_cmds.html#wpxref95805>
command to display the system default certificate-key pair"
I checked customer router and there is no crypto on there.
So is it ok if I use this command _session security mixed_.
Angel?
Thanks
Ash
*From:* kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma]
*Sent:* 07 June 2010 11:46
*To:* Ashar Siddiqui
*Cc:* ccie_voice@onlinestudylist.com
<mailto:ccie_voice@onlinestudylist.com>
*Subject:* Re: [OSL | CCIE_Voice] Setting up Voicemail to send Email -
CME/CUE 7.0
Hi,
Everything for email notification need to be setup on CUE not CME.
when you configure your imap account on the client (outlook or lotus
notes) you have to specify the email address like
"usern...@ip_address-cue" and the password of the user
Below the steps:
* Enable IMAP service "service imap enable"
* Add a new privilege (if doesn't exist) called "vm-imap"
* Add a new Group name it IMAP if you want
* Add users you wants to receive email to the group IMAP
Enjoy
regards
Naoufal
On 06/07/2010 11:28 AM, Ashar Siddiqui wrote:
Hello all,
I am setting up Email notification for one of my customer and I cannot
find good documentation for configuring this. This is what I have come
up with to setup email notification for all users.
Voice Mail -> Message Notification -> Notification Administration ->
enabled system-wide notification for ALL messages & attach voice
messages to email notification message
Voice Mail -> Message Notification -> Subscriber Notification
Management -> went to my user profile, enabled notification and
enabled "Email Inbox"
Enter email address for all Subscribers
Enabling Schedule for all Subscribers
Profile tab - enable notification for all the user, apply changes
System->SMTP Settings
System->Domain Name Settings
From CME (GUI) > Defaults > Enter outgoing email address
For some reason I cannot access the GUI of CME and hence won't be able
to configure outgoing email address.
Does anyone know how can we do this from *CME CLI or CUE GUI*? I have
found it under Fax settings of CUE..is that the same thing?
Also, is there any step I am missing?
Any suggestion/advice would be much appreciated.
Thanks
_______________________________________________
For more information regarding industry leading CCIE Lab training, please
visitwww.ipexpert.com <http://www.ipexpert.com>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com