And no settings under CUE GUI needed?
I mean Message notification> Enable system-wide notification? Also, what if I configure it thru SMTP? Will that deliver to company mailbox? Is that supported on AIM module? Any restrictions etc.. Thanks for all your help. Ash> From: kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma] Sent: 07 June 2010 12:59 To: Ashar Siddiqui Cc: ccie_voice@onlinestudylist.com; 'Angel Perez' Subject: Re: [OSL | CCIE_Voice] Setting up Voicemail to send Email - CME/CUE 7.0 The problem with imap is that you cannot use the mailbox of the company (exchange) u have to setup an IMAP account for each user and users will have a separate mailbox for voicemail. So voicemail will go to us...@10.10.202.2 you don't neet to add any thing On 06/07/2010 12:54 PM, Ashar Siddiqui wrote: Thanks Kerboute. So let's say user has an email address us...@company.com... You said that now we will have to create a separate IMAP account for each user (customer has 40 users - that means 40 IMAP accounts).. Now when a voicemail is left, will it go to us...@company.com or us...@10.10.202.2.... Also do I have to add this command at CUE session security mixed From: kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma] Sent: 07 June 2010 12:43 To: Ashar Siddiqui Cc: ccie_voice@onlinestudylist.com; 'Angel Perez' Subject: Re: [OSL | CCIE_Voice] Setting up Voicemail to send Email - CME/CUE 7.0 You don't need to setup any thing on exchange server, cuz CUE doesn't support unified messaging is like unity connection but you can configure client "create a new imap account on outlook or Lotus" to receive email from unity express, in this scenario CUE is the SMTP server. So what you need now after doing the step just configue an IMAP account on outlook with email address like usern...@ip_address-cue for example us...@10.10.202.2, the imap server is unity express (u don't have to specify the smpt server) then try to leave voicemail for the user1 and check on your outlook client if u receive the email from unity express. I hope this will help Naoufal On 06/07/2010 12:29 PM, Ashar Siddiqui wrote: Thanks guys. After doing those steps Kerboute, do I have to do anything under CUE GUI? Like enabling messaging, configuring subscriber email addresses etc? How the voicemail will reach to their email address? I don't have visibility/access to their Email server..What I have to tell them to make this work..any settings on Exchange server? Also I was reading this doc http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/administratio n/guide/voicemail/12advVM.html#wp1025255 Over here it says "The system must have a default security certificate and private key installed before SSL connections are permitted on Cisco Unity Express. Use the show <http://www.cisco.com/en/CCIMO/TD/-Migration/voice_ip_comm/CUE%20Command%20R ef/s_cmds.html#wpxref95805> crypto key command to display the system default certificate-key pair" I checked customer router and there is no crypto on there. So is it ok if I use this command session security mixed. Angel? Thanks Ash From: kerboute kerboute [mailto:naoufal.kerbo...@cbi.ma] Sent: 07 June 2010 11:46 To: Ashar Siddiqui Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Setting up Voicemail to send Email - CME/CUE 7.0 Hi, Everything for email notification need to be setup on CUE not CME. when you configure your imap account on the client (outlook or lotus notes) you have to specify the email address like "usern...@ip_address-cue" and the password of the user Below the steps: * Enable IMAP service "service imap enable" * Add a new privilege (if doesn't exist) called "vm-imap" * Add a new Group name it IMAP if you want * Add users you wants to receive email to the group IMAP Enjoy regards Naoufal On 06/07/2010 11:28 AM, Ashar Siddiqui wrote: Hello all, I am setting up Email notification for one of my customer and I cannot find good documentation for configuring this. This is what I have come up with to setup email notification for all users. Voice Mail -> Message Notification -> Notification Administration -> enabled system-wide notification for ALL messages & attach voice messages to email notification message Voice Mail -> Message Notification -> Subscriber Notification Management -> went to my user profile, enabled notification and enabled "Email Inbox" Enter email address for all Subscribers Enabling Schedule for all Subscribers Profile tab - enable notification for all the user, apply changes System->SMTP Settings System->Domain Name Settings >From CME (GUI) > Defaults > Enter outgoing email address For some reason I cannot access the GUI of CME and hence won't be able to configure outgoing email address. Does anyone know how can we do this from CME CLI or CUE GUI? I have found it under Fax settings of CUE..is that the same thing? Also, is there any step I am missing? Any suggestion/advice would be much appreciated. Thanks _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
