i found the issue , i took out the ntp master and then shut down/ no shut my f0/0 connecting to the UTC server, and the clock was syncing as below.. good
hq#sh ntp ass address ref clock st when poll reach delay offset disp*~157.26.1.100 127.127.1.1 15 63 64 377 0.000 2901006 3.641 * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured hq#sho run | s ntpntp source Loopback0ntp server 157.26.1.100 --- On Sat, 9/17/11, Marko Milivojevic <mar...@ipexpert.com> wrote: From: Marko Milivojevic <mar...@ipexpert.com> Subject: Re: [OSL | CCIE_Voice] ntp To: "Ray" <jonha...@yahoo.com> Cc: "ccie voice" <ccie_voice@onlinestudylist.com> Date: Saturday, September 17, 2011, 11:44 PM Why did you configure your router to be NTP master? When you did that, on which stratum did your router operate? If it was less than 15, will it sync to a server on stratum 15? Answer these questions and you'll know the answer to yours :-) -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Sep 17, 2011 at 18:14, Ray <jonha...@yahoo.com> wrote: > looking at the sho ntp ass below and the config below. I could not make the > Hq router syn its time from 1567.26.1.100. this question troubled me when i > took the exams. any idea!!!!!!!.. the UTC server at 157.26.1.100 was set to > stratum 15 i think... so how can u make HQ syn time from the UTC server... I > was confused here.. > ntp source Loopback0 > ntp master > ntp server 157.26.1.100 > > hq#sho ntp ass > address ref clock st when poll reach delay offset > disp > *~127.127.1.1 .LOCL. 7 12 16 377 0.000 0.000 > 0.238 > ~157.26.1.100 78.85.76.76 16 34 64 376 0.000 2901016 > 2.591 > * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com