Hi Ashraf, You will still be able to sync time without the master command.
HTH From: Ashraf Ayyash <ash.ayy...@gmail.com> Date: Sun, 18 Sep 2011 02:28:12 -0700 To: Ray <jonha...@yahoo.com> Cc: ccie voice <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] ntp Hi all , if we took off the master command we will not be able to sync our internal network entities to the HQ router , please feel free to correct me if i am wrong , the output you gave Ray for the first email and the config say that you have added the master command before you synced with the external ntp and so your internal router got the highest level , to get rid of this you can configure the ntp server and then make sure that you are synced and then use the master command with lower stratum level and this should do the trick for you , below the link : http://www.cisco.com/en/US/docs/ios/12_1/configfun/configuration/guide/fcd30 3.html#wp1004877 Ash On Sat, Sep 17, 2011 at 11:35 PM, Ray <jonha...@yahoo.com> wrote: > i found the issue , i took out the ntp master and then shut down/ no shut my > f0/0 connecting to the UTC server, and the clock was syncing as below.. good > > hq#sh ntp ass > > address ref clock st when poll reach delay offset disp > *~157.26.1.100 127.127.1.1 15 63 64 377 0.000 2901006 3.641 > * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ configured > > hq#sho run | s ntp > ntp source Loopback0 > ntp server 157.26.1.100 > > --- On Sat, 9/17/11, Marko Milivojevic <mar...@ipexpert.com> wrote: >> >> From: Marko Milivojevic <mar...@ipexpert.com> >> Subject: Re: [OSL | CCIE_Voice] ntp >> To: "Ray" <jonha...@yahoo.com> >> Cc: "ccie voice" <ccie_voice@onlinestudylist.com> >> Date: Saturday, September 17, 2011, 11:44 PM >> >> >> Why did you configure your router to be NTP master? When you did that, >> on which stratum did your router operate? If it was less than 15, will >> it sync to a server on stratum 15? >> >> Answer these questions and you'll know the answer to yours :-) >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: mar...@ipexpert.com <http://mc/compose?to=mar...@ipexpert.com> >> Telephone: +1.810.326.1444 <tel:%2B1.810.326.1444> >> Web: http://www.ipexpert.com/ >> >> On Sat, Sep 17, 2011 at 18:14, Ray <jonha...@yahoo.com >> <http://mc/compose?to=jonha...@yahoo.com> > wrote: >>> > looking at the sho ntp ass below and the config below. I could not make >>> the >>> > Hq router syn its time from 1567.26.1.100. this question troubled me when i >>> > took the exams. any idea!!!!!!!.. the UTC server at 157.26.1.100 was set >>> to >>> > stratum 15 i think... so how can u make HQ syn time from the UTC server... I >>> > was confused here.. >>> > ntp source Loopback0 >>> > ntp master >>> > ntp server 157.26.1.100 >>> > >>> > hq#sho ntp ass >>> > address ref clock st when poll reach delay offset >>> > disp >>> > *~127.127.1.1 .LOCL. 7 12 16 377 0.000 0.000 >>> > 0.238 >>> > ~157.26.1.100 78.85.76.76 16 34 64 376 0.000 2901016 >>> > 2.591 >>> > * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ >>> configured >>> > _______________________________________________ >>> > For more information regarding industry leading CCIE Lab training, please >>> > visit www.ipexpert.com <http://www.ipexpert.com> >>> > >>> > Are you a CCNP or CCIE and looking for a job? Check out >>> > www.PlatinumPlacement.com <http://www.PlatinumPlacement.com> >>> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com <http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.PlatinumPlacement.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com