you are able to sync with out the master command to the HQ router ? can you get show ntp status assoc please ?
On Sun, Sep 18, 2011 at 6:21 AM, Mini Me <cciev.min...@gmail.com> wrote: > Hi Ashraf, > > You will still be able to sync time without the master command. > > HTH > > From: Ashraf Ayyash <ash.ayy...@gmail.com> > Date: Sun, 18 Sep 2011 02:28:12 -0700 > > To: Ray <jonha...@yahoo.com> > Cc: ccie voice <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] ntp > > Hi all , > > if we took off the master command we will not be able to sync our internal > network entities to the HQ router , please feel free to correct me if i am > wrong , > > the output you gave Ray for the first email and the config say that you > have added the master command before you synced with the external ntp > and so your internal router got the highest level , > > to get rid of this you can configure the ntp server and then make sure that > you are synced and then use the master command with lower *stratum level > and this should do the trick for you , > > below the link : > > http://www.cisco.com/en/US/docs/ios/12_1/configfun/configuration/guide/fcd303.html#wp1004877 > > Ash > * > On Sat, Sep 17, 2011 at 11:35 PM, Ray <jonha...@yahoo.com> wrote: > >> i found the issue , i took out the ntp master and then shut down/ no shut >> my f0/0 connecting to the UTC server, and the clock was syncing as below.. >> good >> >> >> hq#sh ntp ass >> >> address ref clock st when poll reach delay offset >> disp >> *~157.26.1.100 127.127.1.1 15 63 64 377 0.000 2901006 >> 3.641 >> * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ >> configured >> >> hq#sho run | s ntp >> ntp source Loopback0 >> ntp server 157.26.1.100 >> >> --- On *Sat, 9/17/11, Marko Milivojevic <mar...@ipexpert.com>* wrote: >> >> >> From: Marko Milivojevic <mar...@ipexpert.com> >> Subject: Re: [OSL | CCIE_Voice] ntp >> To: "Ray" <jonha...@yahoo.com> >> Cc: "ccie voice" <ccie_voice@onlinestudylist.com> >> Date: Saturday, September 17, 2011, 11:44 PM >> >> >> Why did you configure your router to be NTP master? When you did that, >> on which stratum did your router operate? If it was less than 15, will >> it sync to a server on stratum 15? >> >> Answer these questions and you'll know the answer to yours :-) >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: mar...@ipexpert.com <http://mc/compose?to=mar...@ipexpert.com> >> Telephone: +1.810.326.1444 >> Web: http://www.ipexpert.com/ >> >> On Sat, Sep 17, 2011 at 18:14, Ray >> <jonha...@yahoo.com<http://mc/compose?to=jonha...@yahoo.com>> >> wrote: >> > looking at the sho ntp ass below and the config below. I could not make >> the >> > Hq router syn its time from 1567.26.1.100. this question troubled me >> when i >> > took the exams. any idea!!!!!!!.. the UTC server at 157.26.1.100 was set >> to >> > stratum 15 i think... so how can u make HQ syn time from the UTC >> server... I >> > was confused here.. >> > ntp source Loopback0 >> > ntp master >> > ntp server 157.26.1.100 >> > >> > hq#sho ntp ass >> > address ref clock st when poll reach delay offset >> > disp >> > *~127.127.1.1 .LOCL. 7 12 16 377 0.000 0.000 >> > 0.238 >> > ~157.26.1.100 78.85.76.76 16 34 64 376 0.000 2901016 >> > 2.591 >> > * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~ >> configured >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > _______________________________________________ For more information > regarding industry leading CCIE Lab training, please visit > www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
