You don't really need to purchase another steering column. The column shift can be modified wiht a little effort and repaint.
Remove the entire shifter column Remove the column shifter bar. Disassemble most of the steering column. Cut out the hump where the shifter bar attaches Patch it with your favorite body patch material (bondo, fiberglass, etc). Sand, smooth, repaint the whole steering column. Re-install. A floor shift column usually runs $100-$150. This might save you some $$$. I've not done it personally, but have heard of others doing it. Maybe someone else on the list will be able to comment also. good luck, Diane Peppin wrote: > I mean, I guess I need a floor shift "column" duhhh > > Well, > Yes, I have the wiring harness still connected to the dash. I'm sure > I have the console wiring harness too. SO, I guess I need a floor shift > console to proceed. Do I need to drill holes in the tunnel, and where > would that be? :-Diane > > _______________________________________________ > Chevelle-list mailing list > [EMAIL PROTECTED] > http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net -- Check out my webpage at http://www.ProStreetCar.com TREMEC Distributor at http://www.5speedTransmissions.com Team Chevelle member #1778 (Gold), ACES member #1377 Hoosier State Chevelle Assoc (www.IndianaChevelles.com) #6 _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
