Another question: When converting from column shifter to floor shifter, does one have to worry about the reverse lights?
OK mine have never worked since I got the car. It came with a TH350 and column shifter that has been replaced with an aftermarket floor shifter. I have no idea where the original reverse light switch is but assume its in the column. The wiring harness to the rear is original but somewhat butchered up at this point. Larry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Saturday, September 06, 2003 7:33 AM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-list] Column to floor conversion Diane, You didn't mention the console wiring harness, which you will need if you want console lights and the neural safety switch hooked up. Also, do you have the gauges dash wiring harness? If not, you will need some help with the wiring differences. Not a huge problem, you just need to know that they are different and no one that I am aware of has schematics of the gauge wiring. Gene > Sounds like you have what you need. Your only missing a floor shift column > and the floor shift blank to cover up the indicator on the dash. I question > where is your neutral safety switch if you don't change the column right > away. I believe the shift rod still hooks to the column so in key off > position it is locked in park. There is a different lever on the trans for > both the floor shift cable and shift rod to the column, but that's about > it. > ----- Original Message ----- > Wrom: NBOHMKHJYFMYXOEAIJJPHSCRTNHGSWZIDR > To: "The Chevelle Mailing List" <[EMAIL PROTECTED]> > Sent: Saturday, September 06, 2003 10:03 AM > Subject: [Chevelle-list] Column to floor conversion > > > > My 72 Chevelle Malibu has a column shift, I have the console, and a > > shifter, and the cable for the shifter. I really want to do this > > conversion. I am planning on changing the 350 turbo to a 200R4 maybe > > next year with the economy the way it is. Can anyone give me a steps > > needed to pull this off? I also have the gauges dash I plan to > > install...you gotta love these cars to want to do all this...anyway, > > thanks up front for your ideas. :-Diane > > > > > > > > _______________________________________________ > > Chevelle-list mailing list > > [EMAIL PROTECTED] > > http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net > > > _______________________________________________ > Chevelle-list mailing list > [EMAIL PROTECTED] > http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net _______________________________________________ Chevelle-list mailing list [EMAIL PROTECTED] http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net
