I would say you need to use CBWFQ for this. Create an ACL match everything or whatever interested you out of your network and assigned to a class-map, then create a policy map policy-map out class out bandwidth 10M shape peak 13M interface WAN service out out
-lmn On Thu, Apr 24, 2008 at 6:48 PM, Dan Letkeman <[EMAIL PROTECTED]> wrote: > Bizarre response..... It just so happens that it's a shared > connection and there is more than 10 available now, and will be > getting 20+ in the future. > > :) > > On Thu, Apr 24, 2008 at 5:23 PM, Adam Armstrong <[EMAIL PROTECTED]> wrote: > > > > Dan Letkeman wrote: > > > > > Hello, > > > > > > We have changed our internet connection over from 4 dsl lines to one > > > connection. We have a 25mbit connection provided by a neighboring > > > company and we have an agreement with them that we will only use > > > 10mbit bursting to 12 or 13mbit. What would I need to do on our 2801 > > > to limit our bandwidth to 10 bursting to 13? > > > > > > > > What a bizarre arrangement! If you had just taken 10mbit you could have > > just done "speed 10" :) > > > > adam. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
