Luan, I have tried this, but it doesn't seem to take effect. My connection is on an HWIC-4ESW. Could that be a problem? If I use "police cir 10000000" it works and seems to take effect.
Thanks, Dan. On Thu, Apr 24, 2008 at 7:27 PM, Luan Nguyen <[EMAIL PROTECTED]> wrote: > I would say you need to use CBWFQ for this. > Create an ACL match everything or whatever interested you out of your > network and assigned to a class-map, then create a policy map > policy-map out > class out > bandwidth 10M > shape peak 13M > interface WAN > service out out > > -lmn > > > > On Thu, Apr 24, 2008 at 6:48 PM, Dan Letkeman <[EMAIL PROTECTED]> wrote: > > > > > > > > > Bizarre response..... It just so happens that it's a shared > > connection and there is more than 10 available now, and will be > > getting 20+ in the future. > > > > :) > > > > On Thu, Apr 24, 2008 at 5:23 PM, Adam Armstrong <[EMAIL PROTECTED]> wrote: > > > > > > > > Dan Letkeman wrote: > > > > > > > Hello, > > > > > > > > We have changed our internet connection over from 4 dsl lines to one > > > > connection. We have a 25mbit connection provided by a neighboring > > > > company and we have an agreement with them that we will only use > > > > 10mbit bursting to 12 or 13mbit. What would I need to do on our 2801 > > > > to limit our bandwidth to 10 bursting to 13? > > > > > > > > > > > What a bizarre arrangement! If you had just taken 10mbit you could have > > > just done "speed 10" :) > > > > > > adam. > > > > > > > > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
