While configuring and OSPF demand circuit over ISDN, I noticed that the ISDN
link would disconnected and immediately reconnect - because the change in
ospf topology was triggering and LSA flood - forcing the ISDN line to
reconnect. However, the dialer enable-timeout setting was at it's default
of 15 seconds so the ISDN link should have been forced to wait 15 seconds
before attempting to reconnect (and thereby giving the LSA flood time to
pass). However, this did not happen. No matter what I set the dialer
enable-timeout to, the redial happened immediately.
Question: What am I missing? (or mis-understanding)
Thanks in advance!
Louie
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
