Louie,
dialer enable-timeout is used for callback.
hth,
Mark.
At 12:03 AM 10/25/00 -0500, Louie Belt wrote:
>While configuring and OSPF demand circuit over ISDN, I noticed that the ISDN
>link would disconnected and immediately reconnect - because the change in
>ospf topology was triggering and LSA flood - forcing the ISDN line to
>reconnect. However, the dialer enable-timeout setting was at it's default
>of 15 seconds so the ISDN link should have been forced to wait 15 seconds
>before attempting to reconnect (and thereby giving the LSA flood time to
>pass). However, this did not happen. No matter what I set the dialer
>enable-timeout to, the redial happened immediately.
>
>Question: What am I missing? (or mis-understanding)
>
>Thanks in advance!
>
>Louie
>
>
>
>
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
