we need the output of
"show int tok 0"
and
check the "Keepalive" too
Sam Li
----- Original Message -----
From: Andrew Larkins <[EMAIL PROTECTED]>
To: Cisco Mail List <[EMAIL PROTECTED]>
Sent: Wednesday, November 01, 2000 4:18 PM
Subject: EIGRP Neighbour - keeps flapping
> HI all,
>
> I have to routers connected on a token ring segment. Every 120seconds
> exactly they lose the neighbourship. This is then established immediately
> but keeps flapping. There have been no changes to the default EIGRP config
> here in relation to timers.
>
> Any idea's????
>
>
> Andrew Larkins
> BCom, CCNA, CCDA
> Usko Communications
> Tel: +2711 800-9300
> Fax: +2711 800-9495/6/7/8/9
> Cell: +2783-656-7214
> Email: [EMAIL PROTECTED]
> OR [EMAIL PROTECTED]
>
>
> "This message may contain information which is confidential and subject to
> legal privilege. If you are not the intended recipient, you may not
peruse,
> use, disseminate, distribute or copy this message. If you have received
> this message in error, please notify the sender immediately by email,
> facsimile or telephone and return and/or destroy the original message."
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
