do a show interface on the specific interfaces on both routers
for a first step in trooubleshooting your problem
another step would be to check the token ring speed that
they are both set to. (although i am no expert in token ring)
check for errors both in and out....
maybe cut and paste the results...
then we will have more idea to help you.
Regards,
Jason Baker
Network Engineer
-----Original Message-----
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 01, 2000 7:18 PM
To: Cisco Mail List
Subject: EIGRP Neighbour - keeps flapping
HI all,
I have to routers connected on a token ring segment. Every 120seconds
exactly they lose the neighbourship. This is then established immediately
but keeps flapping. There have been no changes to the default EIGRP config
here in relation to timers.
Any idea's????
Andrew Larkins
BCom, CCNA, CCDA
Usko Communications
Tel: +2711 800-9300
Fax: +2711 800-9495/6/7/8/9
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]