Hi Jason,

I think you will find that version 11 of the IOS has "no ip classless" set by default 
and version 12 has "ip classess" as its default. 

Earlier I sent out a message re checking the "ip classless" statement.  That was my 
thinking as well.

Teunis,
Hobart, Tasmania
Australia



On Wednesday, December 13, 2000 at 09:23:21 AM, Jason Baker wrote:

> Hi Kevin,
> 
> i have found this happens on version 11 of the IOS. However that will
> work on version 12 :).
> 
> Regards,
> 
> Jason Baker
> Network Engineer
> MCSE, CCNA
> 
> -----Original Message-----
> From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 13, 2000 7:36 AM
> To: cisco
> Subject: EIGRP
> 
> 
> Group,
> 
> In the lab again looking at a scenario.
> 
> At first, I configured a transit link with a /24 mask.
> 
> Later I thought - gee that's going to be a /29 or /30 in real life so I went
> to change it.
> 
> However, the router wouldn't accept "network 200.1.1.0 0.0.0.7" under
> "router eigrp 10".  It fails with the caret pointing at the first zero in
> the wildcard mask.
> 
> doing a "?" after "network 200.1.1.0" just comes up with a <cr>.
> 
> However, on CCO I see examples of both statements - some with the mask
> others without.
> 
> Has the behavior of EIGRP changed lately even so that CCO has conflicting
> examples or am I missing some connection?
> 
> All routers have ip classless and ip subnet-zero configured.
> 
> By the way, my lab scenario has OSPF redistributing the EIGRP. Looking at an
> upstream routing table it shows the EIGRP network as a /29 even though there
> is no "mask" in the statement.
> 
> So what am I missing?
> 
> Kevin Wigle
> 
> 
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> 
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> 
> 


--
www.tasmail.com


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to