RFC 950 was the original subnetting rule that did not allow the use of subnet zero. The new RFC 1812 does allow the use of subnet zero. This assumes that you are using a routing protocol that is aware of the difference between 131.107.0.0/16 and 131.107.0.0/17. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
- Ip addressing question John lay
- Ip addressing question IST . EPNL-CT-PPC-DAT
- Ip addressing question Daniel Fey
- Ip addressing question Fred Danson
- RE: Ip addressing question Jennifer Cribbs
- RE: Ip addressing question Howard C. Berkowitz
- RE: Ip addressing question Frank Wells
- Re: Ip addressing question Gareth Hinton
- Re: Ip addressing question Neil Schneider
- Re: Ip addressing question Gareth Hinton
- RE: Ip addressing question Gary Jackson
- Re: Ip addressing question Jack
- Re: Ip addressing question Groupstudy