Thanks but how to download IOS to the new Flash via your console port =
(or any other way) from rommode.>???????????????
=20
"hmt" <[EMAIL PROTECTED]> wrote in message =
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> When you remove the old flash, there goes your IOS. For some reason =
the=20
> "rom" IOS doesn't allow you to download images via tftp from rom mode. =
You=20
> will need to download IOS to the new Flash via your console port from=20
> rommode.
> One way to get around is if you have a flash card (not SIMMS), copy an =
IOS=20
> image in there before you replace the SIMMS.
>=20
> [EMAIL PROTECTED] ("CCNA") wrote in
> <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
>=20
> >Hi All,
> > I need some help.I am replacing the flash memory of my 3620
> > router=20
> >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> >inserted the new Flash SIMMs
> >(They are blank).After I inserted the Flash SIMMs the router's =
"syetem"
> >LED started blinking constantly. I have also replaced the DRAMs =
from
> >24 MB to 64 (16x4) but they are fine.
> >Following is the error message
> >
> >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
SOFTWARE
> >(fc1)
> >Copyright (c) 1999 by cisco Systems, Inc.
> >C3600 processor with 65536 Kbytes of main memory
> >Main memory is configured to 64 bit mode with parity disabled
> >
> >loadprog: error - Invalid image for platform
> >e_machine =3D 43, cpu_type =3D 30
> >boot: cannot load "flash:"
> >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> >SOFTWARE (fc1)
> >.
> >.
> >romon1>.
> >
> >What I want to ask is is it possible that we can insert a brand new
> >flash in the router and install the new IOS in it provided there is =
no
> >flash Memory in it on other slots or I can only upgrade not replace =
the
> >flash SIMMs with the new ones???
> >
> >What should I do to make it work ?? I have a 3640 router also.Can it =
be
> >of my help in any way ????? How can I insert the new flash of 16MB in
> >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> >3620 ?????? Partition like thing ..........
> >Please giude me.............
> >
> >Thanks to All
> >
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html Report misconduct and
> >Nondisclosure violations to [EMAIL PROTECTED]=20
> >
> >
>=20
> _________________________________
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>=20
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
