Thanks Chris and Pawel,
The problem was solved by the Xmodem
from rommmon>. That was really a very very slow procedure and took about 1.5
hours to transfer the image through the Console cable.
CCNA
----- Original Message -----
From: "Pawel Sikora" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 31, 2001 7:41 PM
Subject: Re: 3600 Flash
> ----- Original Message -----
> From: "Chris Supino" <[EMAIL PROTECTED]>
> To: "CCNA" <[EMAIL PROTECTED]>; <>
> Sent: Wednesday, January 31, 2001 12:38 PM
> Subject: RE: 3600 Flash
>
>
> > CCNA,
> >
> > You will need to replace the image on the flash chips via console cable
> > (Xmodem) after you insert the new flash chips. This is the only way to
do it
> > on a 3600. I believe on a 2600 you have TFTP download available from
Rommon
> > mode.
> >
> ...
> > What should I do to make it work ?? I have a 3640 router also.Can it be
of
> > my help in any way ????? How can I insert the new flash of 16MB in 3640
> > which has 8 MB SIMM and copy the IOS in it and place it back to 3620
??????
> > Partition like thing ..........
> > Please giude me.............
>
> Yes, this should work except of necessary partitioning and flashing again
> old software of 3640 into old partition.
>
> Without 3640 you can do it as follows:
> Install old 2x8 fsimms and boot old software
> Partiton flash into 2 equal size partitions (8MB each)
> Flash any old software less than 8Mbit into one partition
> Install mix of old and new fsimms (total of 24M flash should appear)
> Partition once again into 2 or 3 partitions of 8MBs
> Flash partition beginning at new fsimm boundary
> Install both new fsimms
> Finally partition and flash as desired.
>
> P/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
