Download an older and smaller version via xmodem. Then, when that's up you
can tftp the larger version and it won't take as long.
ramius
""Thomas Schaffner"" <[EMAIL PROTECTED]> wrote in message
968eou$jq0$[EMAIL PROTECTED]">news:968eou$jq0$[EMAIL PROTECTED]...
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
> /fcprt2/fcimages.htm#xtocid1196637
>
> Takes hours...
>
> Thomas
>
> ""CCNA"" <[EMAIL PROTECTED]> wrote in message
> 000001c094b4$4f483410$0101a8c0@Ejaz1">news:000001c094b4$4f483410$0101a8c0@Ejaz1...
> > Thanks but how to download IOS to the new Flash via your console port =
> > (or any other way) from rommode.>???????????????
> >
> > =20
> > "hmt" <[EMAIL PROTECTED]> wrote in message =
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > When you remove the old flash, there goes your IOS. For some reason =
> > the=20
> > > "rom" IOS doesn't allow you to download images via tftp from rom mode.
=
> > You=20
> > > will need to download IOS to the new Flash via your console port
from=20
> > > rommode.
> > > One way to get around is if you have a flash card (not SIMMS), copy an
=
> > IOS=20
> > > image in there before you replace the SIMMS.
> > >=20
> > > [EMAIL PROTECTED] ("CCNA") wrote in
> > > <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
> > >=20
> > > >Hi All,
> > > > I need some help.I am replacing the flash memory of my 3620
> > > > router=20
> > > >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> > > >inserted the new Flash SIMMs
> > > >(They are blank).After I inserted the Flash SIMMs the router's =
> > "syetem"
> > > >LED started blinking constantly. I have also replaced the DRAMs =
> > from
> > > >24 MB to 64 (16x4) but they are fine.
> > > >Following is the error message
> > > >
> > > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
> > SOFTWARE
> > > >(fc1)
> > > >Copyright (c) 1999 by cisco Systems, Inc.
> > > >C3600 processor with 65536 Kbytes of main memory
> > > >Main memory is configured to 64 bit mode with parity disabled
> > > >
> > > >loadprog: error - Invalid image for platform
> > > >e_machine =3D 43, cpu_type =3D 30
> > > >boot: cannot load "flash:"
> > > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> > > >SOFTWARE (fc1)
> > > >.
> > > >.
> > > >romon1>.
> > > >
> > > >What I want to ask is is it possible that we can insert a brand new
> > > >flash in the router and install the new IOS in it provided there is =
> > no
> > > >flash Memory in it on other slots or I can only upgrade not replace
=
> > the
> > > >flash SIMMs with the new ones???
> > > >
> > > >What should I do to make it work ?? I have a 3640 router also.Can it
=
> > be
> > > >of my help in any way ????? How can I insert the new flash of 16MB in
> > > >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> > > >3620 ?????? Partition like thing ..........
> > > >Please giude me.............
> > > >
> > > >Thanks to All
> > > >
> > > >
> > > >_________________________________
> > > >FAQ, list archives, and subscription info:
> > > >http://www.groupstudy.com/list/cisco.html Report misconduct and
> > > >Nondisclosure violations to [EMAIL PROTECTED]=20
> > > >
> > > >
> > >=20
> > > _________________________________
> > > FAQ, list archives, and subscription info: =
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >=20
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
