http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c
/fcprt2/fcimages.htm#xtocid1196637
Takes hours...
Thomas
""CCNA"" <[EMAIL PROTECTED]> wrote in message
000001c094b4$4f483410$0101a8c0@Ejaz1">news:000001c094b4$4f483410$0101a8c0@Ejaz1...
> Thanks but how to download IOS to the new Flash via your console port =
> (or any other way) from rommode.>???????????????
>
> =20
> "hmt" <[EMAIL PROTECTED]> wrote in message =
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > When you remove the old flash, there goes your IOS. For some reason =
> the=20
> > "rom" IOS doesn't allow you to download images via tftp from rom mode. =
> You=20
> > will need to download IOS to the new Flash via your console port from=20
> > rommode.
> > One way to get around is if you have a flash card (not SIMMS), copy an =
> IOS=20
> > image in there before you replace the SIMMS.
> >=20
> > [EMAIL PROTECTED] ("CCNA") wrote in
> > <001e01c08b57$33a12bb0$0101a8c0@Ejaz1>:=20
> >=20
> > >Hi All,
> > > I need some help.I am replacing the flash memory of my 3620
> > > router=20
> > >from 16MB (8x2) to 32 (16x2). I have taken out both flash SIMMS and
> > >inserted the new Flash SIMMs
> > >(They are blank).After I inserted the Flash SIMMs the router's =
> "syetem"
> > >LED started blinking constantly. I have also replaced the DRAMs =
> from
> > >24 MB to 64 (16x4) but they are fine.
> > >Following is the error message
> > >
> > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE =
> SOFTWARE
> > >(fc1)
> > >Copyright (c) 1999 by cisco Systems, Inc.
> > >C3600 processor with 65536 Kbytes of main memory
> > >Main memory is configured to 64 bit mode with parity disabled
> > >
> > >loadprog: error - Invalid image for platform
> > >e_machine =3D 43, cpu_type =3D 30
> > >boot: cannot load "flash:"
> > >System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELRELEASE
> > >SOFTWARE (fc1)
> > >.
> > >.
> > >romon1>.
> > >
> > >What I want to ask is is it possible that we can insert a brand new
> > >flash in the router and install the new IOS in it provided there is =
> no
> > >flash Memory in it on other slots or I can only upgrade not replace =
> the
> > >flash SIMMs with the new ones???
> > >
> > >What should I do to make it work ?? I have a 3640 router also.Can it =
> be
> > >of my help in any way ????? How can I insert the new flash of 16MB in
> > >3640 which has 8 MB SIMM and copy the IOS in it and place it back to
> > >3620 ?????? Partition like thing ..........
> > >Please giude me.............
> > >
> > >Thanks to All
> > >
> > >
> > >_________________________________
> > >FAQ, list archives, and subscription info:
> > >http://www.groupstudy.com/list/cisco.html Report misconduct and
> > >Nondisclosure violations to [EMAIL PROTECTED]=20
> > >
> > >
> >=20
> > _________________________________
> > FAQ, list archives, and subscription info: =
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >=20
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
