Why are you wasting your time with ATM over broadband?
""Jason"" <[EMAIL PROTECTED]> wrote in message
96fumt$fi9$[EMAIL PROTECTED]">news:96fumt$fi9$[EMAIL PROTECTED]...
> Here's what I just sent off to PacBell's support team, but I'm sure I'll
> have to battle their live tech support personnel to get in touch with an
> engineer who can answer this (if someone else knows, that'd be great as my
> ATM knowledge is limited to configuring a few 1417 ADSL CPE routers):
>
> Up until this point the customer has connected with their Westel Wirespeed
> using the EnterNet 300 software. However, we're moving to a new platform
for
> VPN support and security:
>
> I'm configuring a Cisco 1720 router with an ADSL interface card for a
> customer with Basic ADSL which uses PPPoE. The Cisco 1720 supports PPPoE
> authentication, but I first need more ATM info. What PVC information
should
> I configure for the router? I've tried 0/35 & 8/35 (the two standard PVCs
I
> know about for Enhanced ADSL), but neither get me past Layer 2 ATM.
>
> --
>
> As a side note, here's the base config I used on the 1720 and also on an
> 827-4v for my personal static "Enhanced" ADSL connection (no need for
PPPoE,
> and PVC 0/35 worked):
>
> bridge irb
> !
> !
> !
> interface ATM0
> no ip address
> no ip route-cache
> no ip mroute-cache
> atm vc-per-vp 256
> no atm ilmi-keepalive
> pvc 0/35
> !
> dsl operating-mode auto
> no fair-queue
> bridge-group 1
> !
> interface FastEthernet0
> ip address 192.168.45.172 255.255.255.0
> speed auto
> !
> interface BVI1
> ! I configure a static MAC so that I don't have to wait
> ! for the PBI router's ARP table to
> ! clear out when I change routers
> mac-address 0000.0c85.8f1c
> ip address 63.206.176.162 255.255.255.248
> !
> ip classless
> !
> bridge 1 protocol ieee
> bridge 1 route ip
>
>
> --
> Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
> List email: [EMAIL PROTECTED]
> Homepage: http://jason.artoo.net/
> Cisco resources: http://r2cisco.artoo.net/
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]