Oh yeah. Nobody said it's a layer 3 issue. It's obviously an IOS issue since
it doesn't make sense why it can't be configured that way. NT servers can
have one NIC with multiple IP addresses.
Yonkerbonk <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> You can add IPX addresses to it, so it doesn't seem to
> be an issue of layer 3 addresses. I think it just a
> matter of Cisco IOS supporting it.
>
> Michael
>
> --- Kenneth <[EMAIL PROTECTED]> wrote:
> > try adding an ip address to it.
> >
> > "Tim Lovelace" <[EMAIL PROTECTED]> wrote in
> > message
> >
> news:[EMAIL PROTECTED]...
> > > This seems to be incorrect. I tried this on a
> > router I had spare and below
> > > are hte results. It may be a newer feature, I am
> > to lazy to look on CCO.
> > >
> > > Tim
> > >
> > >
> > > Router2#sh ver
> > > Cisco Internetwork Operating System Software
> > > IOS (tm) C2600 Software (C2600-I-M), Version
> > 12.0(15), RELEASE SOFTWARE
> > > (fc1)
> > >
> > > ....
> > >
> > > Router2#config t
> > > Enter configuration commands, one per line. End
> > with CNTL/Z.
> > > Router2(config)#int e0/0
> > > Router2(config-if)#int e0/0.1
> > > Router2(config-subif)#
> > > 00:01:29: %LINK-3-UPDOWN: Interface Ethernet0/0,
> > changed state to up
> > > Router2(config-subif)#^Z
> > > Router2#sh run
> > >
> > > ....
> > >
> > > interface Ethernet0/0
> > > ip address 10.10.10.1 255.255.255.128
> > > no ip directed-broadcast
> > > !
> > > interface Ethernet0/0.1
> > > no ip directed-broadcast
> > > !
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > Brian
> > > Sent: Monday, February 19, 2001 9:29 PM
> > > To: Chris Wornell
> > > Cc: [EMAIL PROTECTED]
> > > Subject: Re: Creating Multiple Interfaces on an
> > Ethernet Port
> > >
> > >
> > >
> > > the only way you can create sub interfaces on
> > ethernet is to use dot1q or
> > > ISL encapsulation on a FastEthernet interface
> > (VLANs)
> > >
> > > brian
> > >
> > >
> > > On Mon, 19 Feb 2001, Chris Wornell wrote:
> > >
> > > > Hello,
> > > >
> > > > I've found out you can't create multiple
> > interfaces on an ethernet port
> > > > apparently. I was wondering why this is
> > exactly? I know you can
> > > accomplish
> > > > the same on serial lines using pvc's but it
> > seems odd you can't do it on
> > > > ethernet. I know there are ethernet only
> > networks and the ip secondary
> > > > command doesn't seem right compared to creating
> > a new interface.
> > > >
> > > > Chris Wornell
> > > > Technical Support
> > > > MM Internet http://mminternet.com
> > > > 888-654-4971
> > > > CCNA, CCDA, CSE
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations
> > to [EMAIL PROTECTED]
> > > >
> > >
> > > -----------------------------------------------
> > > I'm buying used CISCO gear!!
> > > email me for a quote
> > >
> > > Brian Feeny e:[EMAIL PROTECTED]
> > > CCNP+Voice/ATM/Security p:318.222.2638x109
> > > CCDP f:318.221.6612
> > > Network Administrator
> > > ShreveNet Inc. (ASN 11881)
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - Buy the things you want at great prices!
http://auctions.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
