You can add IPX addresses to it, so it doesn't seem to
be an issue of layer 3 addresses. I think it just a
matter of Cisco IOS supporting it.

Michael

--- Kenneth <[EMAIL PROTECTED]> wrote:
> try adding an ip address to it.
> 
> "Tim Lovelace" <[EMAIL PROTECTED]> wrote in
> message
>
news:[EMAIL PROTECTED]...
> > This seems to be incorrect. I tried this on a
> router I had spare and below
> > are hte results. It may be a newer feature, I am
> to lazy to look on CCO.
> >
> > Tim
> >
> >
> > Router2#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2600 Software (C2600-I-M), Version
> 12.0(15), RELEASE SOFTWARE
> > (fc1)
> >
> > ....
> >
> > Router2#config t
> > Enter configuration commands, one per line.  End
> with CNTL/Z.
> > Router2(config)#int e0/0
> > Router2(config-if)#int e0/0.1
> > Router2(config-subif)#
> > 00:01:29: %LINK-3-UPDOWN: Interface Ethernet0/0,
> changed state to up
> > Router2(config-subif)#^Z
> > Router2#sh run
> >
> > ....
> >
> > interface Ethernet0/0
> >  ip address 10.10.10.1 255.255.255.128
> >  no ip directed-broadcast
> > !
> > interface Ethernet0/0.1
> >  no ip directed-broadcast
> > !
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Brian
> > Sent: Monday, February 19, 2001 9:29 PM
> > To: Chris Wornell
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: Creating Multiple Interfaces on an
> Ethernet Port
> >
> >
> >
> > the only way you can create sub interfaces on
> ethernet is to use dot1q or
> > ISL encapsulation on a FastEthernet interface
> (VLANs)
> >
> > brian
> >
> >
> > On Mon, 19 Feb 2001, Chris Wornell wrote:
> >
> > > Hello,
> > >
> > > I've found out you can't create multiple
> interfaces on an ethernet port
> > > apparently.  I was wondering why this is
> exactly?  I know you can
> > accomplish
> > > the same on serial lines using pvc's but it
> seems odd you can't do it on
> > > ethernet.  I know there are ethernet only
> networks and the ip secondary
> > > command doesn't seem right compared to creating
> a new interface.
> > >
> > > Chris Wornell
> > > Technical Support
> > > MM Internet http://mminternet.com
> > > 888-654-4971
> > > CCNA, CCDA, CSE
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations
> to [EMAIL PROTECTED]
> > >
> >
> > -----------------------------------------------
> >           I'm buying used CISCO gear!!
> >               email me for a quote
> >
> > Brian Feeny     e:[EMAIL PROTECTED]
> > CCNP+Voice/ATM/Security     p:318.222.2638x109
> > CCDP         f:318.221.6612
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
> 
> 
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices! http://auctions.yahoo.com/

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to