On Wed, 21 Feb 2001, Tim Lovelace wrote:
> This seems to be incorrect. I tried this on a router I had spare and below
> are hte results. It may be a newer feature, I am to lazy to look on CCO.
>
> Tim
Ok, now try to add an IP address :))
>
>
> Router2#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-I-M), Version 12.0(15), RELEASE SOFTWARE
> (fc1)
>
> ....
>
> Router2#config t
> Enter configuration commands, one per line. End with CNTL/Z.
> Router2(config)#int e0/0
> Router2(config-if)#int e0/0.1
> Router2(config-subif)#
> 00:01:29: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
> Router2(config-subif)#^Z
> Router2#sh run
>
> ....
>
> interface Ethernet0/0
> ip address 10.10.10.1 255.255.255.128
> no ip directed-broadcast
> !
> interface Ethernet0/0.1
> no ip directed-broadcast
> !
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Brian
> Sent: Monday, February 19, 2001 9:29 PM
> To: Chris Wornell
> Cc: [EMAIL PROTECTED]
> Subject: Re: Creating Multiple Interfaces on an Ethernet Port
>
>
>
> the only way you can create sub interfaces on ethernet is to use dot1q or
> ISL encapsulation on a FastEthernet interface (VLANs)
>
> brian
>
>
> On Mon, 19 Feb 2001, Chris Wornell wrote:
>
> > Hello,
> >
> > I've found out you can't create multiple interfaces on an ethernet port
> > apparently. I was wondering why this is exactly? I know you can
> accomplish
> > the same on serial lines using pvc's but it seems odd you can't do it on
> > ethernet. I know there are ethernet only networks and the ip secondary
> > command doesn't seem right compared to creating a new interface.
> >
> > Chris Wornell
> > Technical Support
> > MM Internet http://mminternet.com
> > 888-654-4971
> > CCNA, CCDA, CSE
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> -----------------------------------------------
> I'm buying used CISCO gear!!
> email me for a quote
>
> Brian Feeny e:[EMAIL PROTECTED]
> CCNP+Voice/ATM/Security p:318.222.2638x109
> CCDP f:318.221.6612
> Network Administrator
> ShreveNet Inc. (ASN 11881)
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
-----------------------------------------------
I'm buying / selling used CISCO gear!!
email me for a quote
Netjam, LLC http://www.netjam.net
Brian Feeny Scarlett Parria
[EMAIL PROTECTED] [EMAIL PROTECTED]
318-222-2638 x 109 318-222-2638 x 101
Fax 318-221-6612
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
