Yes,
This is normally called a "floating static"
Configure the static with a higher admin distance. While the default route
is valid, the static will not show up in "sh ip route".
Once the default fails, the floating static route will be installed into the
routing table and it will be visible in "sh ip route".
Kevin Wigle
----- Original Message -----
From: "Thomas"
To:
Sent: Tuesday, 26 June, 2001 00:21
Subject: Administrative Distance [7:9921]
> Hi All,
>
> Is it possible to assign the "Administrative Distance" to a static route
> (default = 1)? In my network, the default route on a router is learned
> through EIGRP (D*EX 0.0.0.0/24) with Administrative Distance of 170. I
> would like to add a static route on this router for backup; however, this
> static route will be chosen over the default route learned through EIGRP,
> since the Administrative Distance for static route is 1. I wonder if it
is
> possible to raise the Administrative Distance of the static route to be
> greater than 170 so that It will only be chosen as a secondary route, in
> case the default route is down???? Thanks All!!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9925&t=9921
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
