ip route a.b.c.d w.x.y.z dentination.address distance ( higher than the
distance of the routing protocol in question )
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdindep.htm#xtocid279708
definitely watch the word wrap
make sense?
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Thomas
Sent: Monday, June 25, 2001 9:22 PM
To: [EMAIL PROTECTED]
Subject: Administrative Distance [7:9921]
Hi All,
Is it possible to assign the "Administrative Distance" to a static route
(default = 1)? In my network, the default route on a router is learned
through EIGRP (D*EX 0.0.0.0/24) with Administrative Distance of 170. I
would like to add a static route on this router for backup; however, this
static route will be chosen over the default route learned through EIGRP,
since the Administrative Distance for static route is 1. I wonder if it is
possible to raise the Administrative Distance of the static route to be
greater than 170 so that It will only be chosen as a secondary route, in
case the default route is down???? Thanks All!!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9927&t=9921
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
