What is the load? It's easy to see with show interface serial.
Theoretically, Frame Relay can deal with on over-utilized link, so I think
your theory is probably right that it's a telco problem, but we need more
data to help.....
Priscilla
>-----Original Message-----
>From: Jeff [mailto:[EMAIL PROTECTED]]
>Sent: Monday, July 23, 2001 5:20 PM
>To: [EMAIL PROTECTED]
>Subject: FrameRelay Over Utilized [7:13349]
>
>
>Hello,
>If I have a frame relay switch which is being over utilized will that cause
>the connection to drop. After looking in the log I see dlci 501 state
>changed
>to inactive, line protocol on interface s0/0.1 changed to down, dlci 501
>active, this keeps going and going through out the log. The local telco
>insists that the circuit is overutilized and this is why the connection is
>dropping. I think it is a telco or csu problem. Also doing a show
>interface
>is showing 3000 crc errors and 500 interface resets for the past 3 days. Is
>there any way to tell for sure whether it is overutilization or a telco
>problem??
>
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13406&t=13349
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
