Alex,

Ip dhcp-server should be sufficient for your needs. Nothing else should need
to be enabled. Try it out.

Tim Booth

----- Original Message -----
From: "khramov" 
To: 
Sent: Wednesday, September 26, 2001 8:24 AM
Subject: Re: DHCP [7:21051]


> Hello,
>      ip dhcp-server works,  I didn't specify it with a hyphen.  So would
you
> agree
>      that the best solution for me would be to disable ip directed
> broadcast, ip
>      helper address and enable ip dhcp-server at the global config?  If I
> enable ip
>      dhcp-server do I need to enable ip forward-protocol udp  (ports 66
and
> 67)?
>
>      Thanks a lot,
>      Alex
>
> MADMAN wrote:
>
> > Hmm..  I haven't done it in a while so I tried it on a 7507 with RSP8's
and
> > an MSFC2,
> > they both accepted the command just fine but are not in the config.   So
I
> > figured they
> > must be enabled by default so I did a no ip forward protocol udp 67 and
> > wallah, there it
> > is!!!
> >
> > C7507MIX#conf t
> > Enter configuration commands, one per line.  End with CNTL/Z.
> > C7507MIX(config)#no ip for
> > C7507MIX(config)#no ip forward-protocol udp 67
> > C7507MIX(config)#^Z
> > C7507MIX#wr t
> > Building configuration...ip kerberos source-interface any
> > ip classless
> > no ip forward-protocol udp bootps
> >
> >   Dave
> >
> > khramov wrote:
> >
> > > I did that, but when I do sh run it is not showing up in config file.
I
> > > mean (ip
> > > forward-protocol udp 67).
> > > Is that the way it is suppose to be?
> > >
> > > MADMAN wrote:
> > >
> > > > Check "ip foward protocol"
> > > >
> > > >   Dave
> > > >
> > > > khramov wrote:
> > > > >
> > > > > Hello
> > > > >      How do I enable broadcast for DHCP server?  I know that ip
> > > > >      helper enables UDP broadcast, but broadcast of netbios
> > > > >      services causes some problems for win nt server.  So I guess
> > > > >      to be more specific what can I do to forward udp broadcast on
> > > > >      ports 67 and 68 only?
> > > > >
> > > > >      And another question that I have what exactly ip
> > > > >      directed-broadcast command does?  I've searched Cisco's web
> > > > >      site but I never came across a clear defenition?
> > > > >
> > > > >      Thanks,
> > > > >      Alex
> > > > >
> > > > > [GroupStudy.com removed an attachment of type text/x-vcard which
had
> a
> > > name
> > > > > of khramov.vcf]
> > > > --
> > > > David Madland
> > > > Sr. Network Engineer
> > > > CCIE# 2016
> > > > Qwest Communications Int. Inc.
> > > > [EMAIL PROTECTED]
> > > > 612-664-3367
> > > >
> > > > "Emotion should reflect reason not guide it"
> > >
> > > [GroupStudy.com removed an attachment of type text/x-vcard which had a
> name
> > > of khramov.vcf]
> > --
> > David Madland
> > CCIE# 2016
> > Senior Network Engineer
> > Qwest Communications
> > 612-664-3367
>
> [GroupStudy.com removed an attachment of type text/x-vcard which had a
name
> of khramov.vcf]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21146&t=21051
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to