At 01:06 PM 9/26/01, khramov wrote:
> From my understanding ip dhcp-server command will enable upd broadcast
> on ports 66 and 67. Is that true?
It causes your router to BE a DHCP server and to accept and process
broadcasts to UDP port 67 and to send responses from port 66. It does not
cause the router to forward UDP broadcasts to port 67.
If you turn your router into a DHCP server, you would also have to identify
an external File Transport Protocol (FTP), Trivial File Transfer Protocol
(TFTP), or remote copy protocol (rcp) server that you will use to store the
DHCP bindings database. The router will access that database. Here's more
info on turning your router into a DHCP server, which is often not a good
idea, in my opinion (because it detracts from the router's real jobs):
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt1/1cfdhcp.htm
Priscilla
>Alex
>
>
>Priscilla Oppenheimer wrote:
>>Why do you want to turn your router into a DHCP server? I thought you
>>already had a DHCP server. You just need a helper address and
>>
>>ip forward-protocol udp 67
>>no ip forward-protocol 137
>>no ip forward-protocol 138
>>
>>The last two commands are because you said that NetBIOS broadcast
>>forwarding was causing problems for your NT server. When you have a helper
>>address, the router forwards a bunch of UDP packets. You have to configure
>>it to be more discerning.
>>
>>Priscilla
>>
>>At 09:24 AM 9/26/01, khramov wrote:
>> >Hello,
>> > ip dhcp-server works, I didn't specify it with a hyphen. So
>> would you
>> >agree
>> > that the best solution for me would be to disable ip directed
>> >broadcast, ip
>> > helper address and enable ip dhcp-server at the global config? If
I
>> >enable ip
>> > dhcp-server do I need to enable ip forward-protocol udp (ports
>> 66 and
>> >67)?
>> >
>> > Thanks a lot,
>> > Alex
>> >
>> >MADMAN wrote:
>> >
>> > > Hmm.. I haven't done it in a while so I tried it on a 7507 with
>> RSP8's and
>> > > an MSFC2,
>> > > they both accepted the command just fine but are not in the
>> config. So I
>> > > figured they
>> > > must be enabled by default so I did a no ip forward protocol udp 67
and
>> > > wallah, there it
>> > > is!!!
>> > >
>> > > C7507MIX#conf t
>> > > Enter configuration commands, one per line. End with CNTL/Z.
>> > > C7507MIX(config)#no ip for
>> > > C7507MIX(config)#no ip forward-protocol udp 67
>> > > C7507MIX(config)#^Z
>> > > C7507MIX#wr t
>> > > Building configuration...ip kerberos source-interface any
>> > > ip classless
>> > > no ip forward-protocol udp bootps
>> > >
>> > > Dave
>> > >
>> > > khramov wrote:
>> > >
>> > > > I did that, but when I do sh run it is not showing up in config
>> file. I
>> > > > mean (ip
>> > > > forward-protocol udp 67).
>> > > > Is that the way it is suppose to be?
>> > > >
>> > > > MADMAN wrote:
>> > > >
>> > > > > Check "ip foward protocol"
>> > > > >
>> > > > > Dave
>> > > > >
>> > > > > khramov wrote:
>> > > > > >
>> > > > > > Hello
>> > > > > > How do I enable broadcast for DHCP server? I know that ip
>> > > > > > helper enables UDP broadcast, but broadcast of netbios
>> > > > > > services causes some problems for win nt server. So I
guess
>> > > > > > to be more specific what can I do to forward udp
>> broadcast on
>> > > > > > ports 67 and 68 only?
>> > > > > >
>> > > > > > And another question that I have what exactly ip
>> > > > > > directed-broadcast command does? I've searched Cisco's web
>> > > > > > site but I never came across a clear defenition?
>> > > > > >
>> > > > > > Thanks,
>> > > > > > Alex
>> > > > > >
>> > > > > > [GroupStudy.com removed an attachment of type text/x-vcard
>> which had
>> >a
>> > > > name
>> > > > > > of khramov.vcf]
>> > > > > --
>> > > > > David Madland
>> > > > > Sr. Network Engineer
>> > > > > CCIE# 2016
>> > > > > Qwest Communications Int. Inc.
>> > > > > [EMAIL PROTECTED]
>> > > > > 612-664-3367
>> > > > >
>> > > > > "Emotion should reflect reason not guide it"
>> > > >
>> > > > [GroupStudy.com removed an attachment of type text/x-vcard which
>> had a
>> >name
>> > > > of khramov.vcf]
>> > > --
>> > > David Madland
>> > > CCIE# 2016
>> > > Senior Network Engineer
>> > > Qwest Communications
>> > > 612-664-3367
>> >
>> >[GroupStudy.com removed an attachment of type text/x-vcard which had a
>> name
>> >of khramov.vcf]
>> groupstudy.com/form/read.php?f=7&i=21133&t=21051
>> >--------------------------------------------------
>> >FAQ, list archives, and subscription info:
>> >http://www.groupstudy.com/lis
>> t/cisco.html
>> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>>________________________
>>
>>Priscilla Oppenheimer
>>http://www.priscilla.com
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21191&t=21051
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
