Bravo, This makes the router a DHCP server:
ip dhcp pool dave
network 10.0.0.0 255.255.255.0
dns-server 172.28.2.217 172.28.2.10
default-router 10.0.0.1
Dave
Tim Booth wrote:
>
> Priscilla and others:
>
> Ip dhcp-server does not turn your router into a dhcp server. It tells your
> router where your dhcp server is.
>
> Tim Booth
>
> ----- Original Message -----
> From: "Priscilla Oppenheimer"
> To:
> Sent: Wednesday, September 26, 2001 12:12 PM
> Subject: Re: DHCP [7:21051]
>
> > Why do you want to turn your router into a DHCP server? I thought you
> > already had a DHCP server. You just need a helper address and
> >
> > ip forward-protocol udp 67
> > no ip forward-protocol 137
> > no ip forward-protocol 138
> >
> > The last two commands are because you said that NetBIOS broadcast
> > forwarding was causing problems for your NT server. When you have a
helper
> > address, the router forwards a bunch of UDP packets. You have to
configure
> > it to be more discerning.
> >
> > Priscilla
> >
> > At 09:24 AM 9/26/01, khramov wrote:
> > >Hello,
> > > ip dhcp-server works, I didn't specify it with a hyphen. So
would
> > you
> > >agree
> > > that the best solution for me would be to disable ip directed
> > >broadcast, ip
> > > helper address and enable ip dhcp-server at the global config? If
> I
> > >enable ip
> > > dhcp-server do I need to enable ip forward-protocol udp (ports 66
> and
> > >67)?
> > >
> > > Thanks a lot,
> > > Alex
> > >
> > >MADMAN wrote:
> > >
> > > > Hmm.. I haven't done it in a while so I tried it on a 7507 with
> RSP8's
> > and
> > > > an MSFC2,
> > > > they both accepted the command just fine but are not in the config.
> So
> > I
> > > > figured they
> > > > must be enabled by default so I did a no ip forward protocol udp 67
> and
> > > > wallah, there it
> > > > is!!!
> > > >
> > > > C7507MIX#conf t
> > > > Enter configuration commands, one per line. End with CNTL/Z.
> > > > C7507MIX(config)#no ip for
> > > > C7507MIX(config)#no ip forward-protocol udp 67
> > > > C7507MIX(config)#^Z
> > > > C7507MIX#wr t
> > > > Building configuration...ip kerberos source-interface any
> > > > ip classless
> > > > no ip forward-protocol udp bootps
> > > >
> > > > Dave
> > > >
> > > > khramov wrote:
> > > >
> > > > > I did that, but when I do sh run it is not showing up in config
> file.
> > I
> > > > > mean (ip
> > > > > forward-protocol udp 67).
> > > > > Is that the way it is suppose to be?
> > > > >
> > > > > MADMAN wrote:
> > > > >
> > > > > > Check "ip foward protocol"
> > > > > >
> > > > > > Dave
> > > > > >
> > > > > > khramov wrote:
> > > > > > >
> > > > > > > Hello
> > > > > > > How do I enable broadcast for DHCP server? I know that ip
> > > > > > > helper enables UDP broadcast, but broadcast of netbios
> > > > > > > services causes some problems for win nt server. So I
> guess
> > > > > > > to be more specific what can I do to forward udp broadcast
> on
> > > > > > > ports 67 and 68 only?
> > > > > > >
> > > > > > > And another question that I have what exactly ip
> > > > > > > directed-broadcast command does? I've searched Cisco's
web
> > > > > > > site but I never came across a clear defenition?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Alex
> > > > > > >
> > > > > > > [GroupStudy.com removed an attachment of type text/x-vcard
which
> > had
> > >a
> > > > > name
> > > > > > > of khramov.vcf]
> > > > > > --
> > > > > > David Madland
> > > > > > Sr. Network Engineer
> > > > > > CCIE# 2016
> > > > > > Qwest Communications Int. Inc.
> > > > > > [EMAIL PROTECTED]
> > > > > > 612-664-3367
> > > > > >
> > > > > > "Emotion should reflect reason not guide it"
> > > > >
> > > > > [GroupStudy.com removed an attachment of type text/x-vcard which
had
> a
> > >name
> > > > > of khramov.vcf]
> > > > --
> > > > David Madland
> > > > CCIE# 2016
> > > > Senior Network Engineer
> > > > Qwest Communications
> > > > 612-664-3367
> > >
> > >[GroupStudy.com removed an attachment of type text/x-vcard which had a
> name
> > >of khramov.vcf]
> > ________________________
> >
> > Priscilla Oppenheimer
> > http://www.priscilla.com
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21189&t=21051
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
