priority queing. Keep in mind priority queing will drown out lower priority traffic in deferance to the higher priority traffic period, it doesn't like to share.
dave Andy Davidson wrote: > > We have a network with one 2522 and 10 1601 routers set up in a hub and > spoke arrangement. Our connections are relatively small 56k Frame Relay. > My question is. Is there a way to give certain applications a higher > priority to the bandwidth available and have the other apps use what ever is > left over. > > Our main application runs a telnet session back to a unix box here at the > main location. There are usually about 3-4 people at the remote location. > Whenever anyone sends a large print job, does a large FTP, or is browsing > the web it makes everyone else's telnet session at the remote site VERY > SLOW. Since the telnet session is priority #1 for our business, I would like > it very much if I could make my routers understand that. > > Any ideas???? > > Thanks in advance for your replies!!! > > Andy -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24965&t=24959 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]