Good old-fashioned re-addressing. Once you re-address, summarize at the abr's.
""Mark Paterson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > All, > > I have a question that may have several answers, I have tried a few with > varying results and would just like to see if anyone else has any > suggestions. We run a Large Telco Data Backbone, most of which has been run > on OSPF and BGP. Our distribution and access layers contain layer three > functionality. The first customer data MAN rings that were built used EIGRP, > we now need to standardize these old network segments and migrate them to > OSPF. This is not the hard part, what is difficult is reducing the size of > Area 0 so that it remains stable. Summarization is the only way. However the > ip addresses used were not continuous and the routed ring is far to large to > use one area. How would you successfully summarize the address over > multi-areas and reduce the size of the area 0 table. > > > Mark > > I Will post what we did later. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26151&t=26091 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
