Can we see the relevant portions of the config plus output from 'show int'?
Thanks, John >>> "Fraasch James" 1/14/02 3:45:41 PM >>> I ran into a problem this weekend. I have a 7204 on one end and an IBM 6611 on the other of a point to point T-1. IBM requires PPP encapsulation. I debugged and got the following: *Jan 12 02:57:19.231: IP: s=172.25.137.201 (local), d=224.0.0.5 (Serial3/7), len 64, sending broad/multicast *Jan 12 02:57:19.231: Se3/7 PPP: Outbound ip packet dropped, line protocol not u p *Jan 12 02:57:19.231: IP: s=172.25.137.201 (local), d=224.0.0.5 (Serial3/7), len 64, encapsulation failed *Jan 12 02:57:19.347: LSP-TUNNEL-TIMER: timer fired for Tunnel Head Checkup I know one of those lines says that the line protocol is not up but I guarantee that it is. We were switching out an existing router that used that line just fine. The Cisco Tech I talked to wanted to talk about reversing the bits and seeing what that does. That's crap. It looks to be just an ARP problem but I can fix it. Has anyone other there ran into this problem before, and if so, how did it get fixed? This is my first post. Please dont leave me hanging. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31920&t=31916 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
