You need to enable OAM. Simply under the PVC add on both end "oam enable"
Dave "[EMAIL PROTECTED]" wrote: > > How can I detect an ATM link went down? > > Due to business reason, we are in a process to replace old Frame Relay > connections with ATM connections. But when Carrier's ATM network had problem > and one of the ATM link went down, the router interface attached to it still > shows up up. For that reason the ISDN backup interface on the same router > wouldn't automatically dial the remote end, and we couldn't meet 7x24 > requirement. > > There was no such problem before switching to ATM. It works perfectly with > FR connections and ISDN DDR Backup. If there was a problem in one of the FR > links, the interface attached to it will go down and the ISDN interface will > automatically dial the remote end. > > Is there any way to get around this problem? > > Thanks in advance. > > Tony > -- > > __________________________________________________________________ > Your favorite stores, helpful shopping tools and great gift ideas. > Experience the convenience of buying online with Shop@Netscape! > http://shopnow.netscape.com/ > > Get your own FREE, personal Netscape Mail account today at > http://webmail.netscape.com/ -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33854&t=33802 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]