I mean "oam-pvc manage"

interface ATM1/0.32 point-to-point
 ip address 1.1.1.2 255.255.255.0
 pvc madman 1/32
  oam-pvc manage
  encapsulation aal5snap


 Dave

MADMAN wrote:
> 
> You need to enable OAM.  Simply under the PVC add on both end "oam
> enable"
> 
>   Dave
> 
> "[EMAIL PROTECTED]" wrote:
> >
> > How can I detect an ATM link went down?
> >
> > Due to business reason, we are in a process to replace old Frame Relay
> > connections with ATM connections. But when Carrier's ATM network had
> problem
> > and one of the ATM link went down, the router interface attached to it
> still
> > shows up up. For that reason the ISDN backup interface on the same router
> > wouldn't automatically dial the remote end, and we couldn't meet 7x24
> > requirement.
> >
> > There was no such problem before switching to ATM. It works perfectly
with
> > FR connections and ISDN DDR Backup. If there was a problem in one of the
FR
> > links, the interface attached to it will go down and the ISDN interface
> will
> > automatically dial the remote end.
> >
> > Is there any way to get around this problem?
> >
> > Thanks in advance.
> >
> > Tony
> > --
> >
> > __________________________________________________________________
> > Your favorite stores, helpful shopping tools and great gift ideas.
> > Experience the convenience of buying online with Shop@Netscape!
> > http://shopnow.netscape.com/
> >
> > Get your own FREE, personal Netscape Mail account today at
> > http://webmail.netscape.com/
> --
> David Madland
> Sr. Network Engineer
> CCIE# 2016
> Qwest Communications Int. Inc.
> [EMAIL PROTECTED]
> 612-664-3367
> 
> "Emotion should reflect reason not guide it"
-- 
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367

"Emotion should reflect reason not guide it"




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33862&t=33802
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to