It's not in a packet that gets sent.
""Sasa Milic"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The router DOES pass total delay and minumum bandwidth of the route > to neighbors. > > check "show ip eigrp topologu > > Sasa > CCIE No 8635 > > > > "Steven A. Ridder" wrote: > > > > I believe the delay is by default set on the interface by the router based > > on the type of link it is. I'm sure there's charts on CCO somewhere. You > > can change this info on the interface with the delay command, which is the > > recommended way of changing a metric if you are forced to do so. The > router > > dosen't pass the delay info of a link to other routers as a raw figure, it > > calculates the BW and delay, then multiplies it by 256 and sends that > > calculation to a neighbor, which is the metric. > > > > ""Yatou Wu"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi, > > > > > > In EIGRP, the delay metric is taken as configured in the interface of the > > > router by the administrator, by default, or by measurement? > > > > > > when the router calculates the metric, it needs to know the minimum > > > bandwidth along the path, and also the delay along the path. how can the > > > router pass the infor around? pass the total delay along the path, or > > delay > > > of every link? > > > > > > thanks > > > > > > yatou > > > > > > _________________________________________________________________ > > > Get your FREE download of MSN Explorer at > > http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36013&t=36001 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]