All I can say is ARE YOU SURE you followed EVERY step VERBATIM!!?? I have done this three times with no problem and one time I screwed up and RMA'd the sup:(
Dave "[EMAIL PROTECTED]" wrote: > > This is the first question I have posted, I appreciate any ideas or > suggestions > you can provide. > > We are following the steps outlined at: > http://www.cisco.com/warp/public/473/81.shtml > to do the software conversion from Hybrid to Native IOS on our Cat 6506. > After > step 18 (if you have the instructions to reference) and we tell it to boot > from > the Native IOS, it comes back up saying that the RP is starting as secondary > processor and it is changing console ownership to switch processor. It is > supposed > to start as primary processor and console ownership should be changed to the > RP. > > All the steps to this point have gone smooth, but it comes up in the SP and > we can't continue with the procedures. This process is a first for us and we > are still playing with it, but any suggestions/experience you have to share > would be appreciated. > > Thanks, > Aaron -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38868&t=38859 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]