When you say CatOS in bootflash what do you mean? You need to have the MSFC IOS image in bootflash of the MSFC, (RP) and you must set the boot variable using the bootldr bootflash:msfcbootxxxxx.
Dave Aaron and Andria Laws wrote: > > Yeah, there's only 18 steps to get to where we are and they were fairly easy > so far. I've tried it a couple times now and had another guy give it a shot > following the instructions all along the way. All the images were where the > instructions said they should be (CatOS in bootflash and Native IOS in > Slot0) and everything looked perfect until we told it to "boot slot0:xxxx". > > Forgive me for not knowing what RMA means, but it sounds bad. > > Aaron > > > "MADMAN" wrote: > > > > All I can say is ARE YOU SURE you followed EVERY step VERBATIM!!?? I > > have done this three times with no problem and one time I > > screwed up and > > RMA'd the sup:( > > > > Dave > > > > "[EMAIL PROTECTED]" wrote: > > > > > > This is the first question I have posted, I appreciate any ideas or > > > suggestions > > > you can provide. > > > > > > We are following the steps outlined at: > > > http://www.cisco.com/warp/public/473/81.shtml > > > to do the software conversion from Hybrid to Native IOS on > > our Cat 6506. > > > After > > > step 18 (if you have the instructions to reference) and we > > tell it to boot > > > from > > > the Native IOS, it comes back up saying that the RP is starting as > > secondary > > > processor and it is changing console ownership to switch > > processor. It is > > > supposed > > > to start as primary processor and console ownership should > > be changed to > > the > > > RP. > > > > > > All the steps to this point have gone smooth, but it comes > > up in the SP and > > > we can't continue with the procedures. This process is a > > first for us and > > we > > > are still playing with it, but any suggestions/experience > > you have to share > > > would be appreciated. > > > > > > Thanks, > > > Aaron > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" > > [EMAIL PROTECTED] -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38928&t=38859 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
