Ronnie- I assume you are referring to the fact that your DSL is PPPoE DSL (You have to install the EnterNet DSL software on your computer if you want to access the DSL Gateway and connect to the internet (which also means you use a User Name/Password combination to connect) ....correct!?!
If so, what model PIX do you have? The 501/506 models support PPPoE under 6.2.1. The following link should get you started.... http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/pixc lnt.htm Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ronnie Higginbotham Sent: Saturday, May 04, 2002 10:32 AM To: [EMAIL PROTECTED] Subject: Configuring Pix with EnterNet DSL [7:43302] I am new to the Pix setup has anybody configured a PIX with EnterNet DSL setup. Any config help would be appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43305&t=43302 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]