Yes Mark I was referring to the PPPoE. I have the client loaded on my PC and cannot pass through the PIX. However I can ping the PIX inside address. I have the 501 just for home use.
Thanks for the link. I searched the site and could find anything like this. Let me try this stuff and I will let you know what happens. When I launch the client I cannot find the server. Thanks for you help. Ronnie ""Mark Odette II"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Ronnie- > I assume you are referring to the fact that your DSL is PPPoE DSL (You have > to install the EnterNet DSL software on your computer if you want to access > the DSL Gateway and connect to the internet (which also means you use a User > Name/Password combination to connect) ....correct!?! > > If so, what model PIX do you have? > > The 501/506 models support PPPoE under 6.2.1. > > The following link should get you started.... > http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/pixc > lnt.htm > > Mark > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Ronnie Higginbotham > Sent: Saturday, May 04, 2002 10:32 AM > To: [EMAIL PROTECTED] > Subject: Configuring Pix with EnterNet DSL [7:43302] > > > I am new to the Pix setup has anybody configured a PIX with EnterNet DSL > setup. Any config help would be appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43308&t=43302 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
