""Ronnie Higginbotham"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Watch for word wrap > > Ronnie > > > > ""Michael L. Williams"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Depends on the model, but usually you'll see traffic all into either > > 128Kbps, 384kbps, 768Kbps or 1.5Mbps.... We have a Polycom unit that has > > ISDN and a LAN port, but if you telnet to it's IP on the LAN you get a > > "status" page showing H.323 is disabled, so we can't use it on the LAN (at > > least without a software update or something). But if you Polycam can > video > > conference over IP with it's ethernet port, then it should be standard > > H.323. I can't recall the ports right off the top of my head, but I'm > > thinking somewhere in the 2600+ range (I've seen other units that use > > 2000-2063), but don't quote me on that.... It's regular IP unicast > traffic, > > but (depending on the model) it's possible to do a multicast streaming > > presentation (usually you'll use the multicast when you want to broadcast > a > > presentation or video, etc to many viewer.... but most times you're not in > a > > "conference" where there are many senders and receivers).... > > > > HTH, > > Mike > > > > "Steven A. Ridder" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Does anyone know what type of traffic a typical Polycom Video Con. unit > > > creates? It it multicast? What ports does it use? Is it standard > h.323? > > > > > > I can sniff it, but if anyone has already done their homework on it, it > > will > > > save me some time. > > > > > > -- > > > > > > RFC 1149 Compliant.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49897&t=49882 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]