Hi, Was wondering if anyone else out there has experienced PIX501 reloads by barely doing more than looking xeyed at it! The 501 I originally had in the lab was easily reloaded, then yesterday it seemed to give up the ghost so I RMAed it. I got the new one and connected it to my PC on my desk. I grabed the PIX and tilted it some to see if I had a link light and wammo, it reloaded. Later I slid the PIX about 6 inches across my desk to give me more elbow room and another reload. I can too easily make this box crash. It doesn't loose power and there are no tracebacks or anything it just restarts.
To make a short story long has anyone seen this behaviour on their PIX501. If not can you try and reproduce it? The engineer at Cisco who RMAed my original PIX has not heard of this ocurring so maybe I'm just lucky:( Thanks Dave -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58946&t=58946 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
