I have 2 501's that I have deployed with no problems as such...

(fingers crossed )

Could the power connection in the back be loose on the inside? It might be a
manufacturing problem?

Thanks

Larry
 

-----Original Message-----
From: Elijah Savage III [mailto:[EMAIL PROTECTED]] 
Sent: Tuesday, December 10, 2002 7:07 PM
To: [EMAIL PROTECTED]
Subject: RE: 501 reloading [7:58946]


Dave,

Do not say yours gave up the ghost please do not say that LOL. Because mine
does the exact same thing I just put it in my rack and leave it alone,
anytime I have to recable my lab I turn it off because the slightest move of
a cable and it reboots, and I hate doing it because my dsl line sometimes is
hard to sync back up such an inconveyance. Now you got me worried about how
long is it going to be before mine goes out.

-----Original Message-----
From: MADMAN [mailto:[EMAIL PROTECTED]] 
Sent: Tuesday, December 10, 2002 6:42 PM
To: [EMAIL PROTECTED]
Subject: 501 reloading [7:58946]


Hi,

  Was wondering if anyone else out there has experienced PIX501 reloads by
barely doing more than looking xeyed at it!  The 501 I originally had in the
lab was easily reloaded, then yesterday it seemed to give up the ghost so I
RMAed it.  I got the new one and connected it to my PC on my desk.  I grabed
the PIX and tilted it some to see if I had a link light and wammo, it
reloaded.  Later I slid the PIX about 6 inches across my desk to give me
more elbow room and another reload.  I can too easily make this box crash.
It doesn't loose power and there are no tracebacks or anything it just
restarts.

  To make a short story long has anyone seen this behaviour on their PIX501.
If not can you try and reproduce it?  The engineer at Cisco who RMAed my
original PIX has not heard of this ocurring so maybe I'm just lucky:(

  Thanks

  Dave
-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"You don't make the poor richer by making the rich poorer." --Winston
Churchill




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58953&t=58946
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to