What do you see with a debug dialer?  How about a sh isdn stat.  Wax 
the dialer interface it's superfluous.

   Dave

Johan Bornman wrote:
> I am having difficulty getting my Cisco 803 to dial out the BRI interface.
> If I run the debug
> commands: isdn q921 and q931  with the debug ppp authentication commands,
> nothing happens. I have
> also tried different configurations but I get the same from the
> router.....nothing. Term mon is
> enabled! The isdn status command shows the line as active or activated, so
> there is no problem with
> the line. I have tried the router on different ISDN lines to be sure.
> 
> How do I check if my BRI interface is working?
> 
> Any feedback/suggestions will be appreciated.
> 
> Regards
> 
> Johan
> 
> 
> 
> Here is my config: (I have x'd out the username, password and dialer string
> number)
> 
> CSTM#sh run
> Building configuration...
> 
> Current configuration : 1020 bytes
> !
> version 12.1
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname CSTM
> !
> enable secret 5 $1$9Y0j$fCPvbvNR8L37mwYBtD66K0
> !
> ip subnet-zero
> !
> no ip domain-lookup
> no ip finger
> isdn switch-type basic-net3
> !
> interface Ethernet0
>  ip address 192.168.3.250 255.255.255.0
>  ip nat inside
> !
> interface BRI0
>  no ip address
>  ip nat outside
>  encapsulation ppp
>  dialer pool-member 1
>  isdn switch-type basic-net3
>  no cdp enable
> !
> interface Dialer0
>  ip address negotiated
>  encapsulation ppp
>  dialer pool 1
>  dialer idle-timeout 300
>  dialer string XXXXXXXXXXX
>  dialer load-threshold 128 outbound
>  dialer-group 1
>  ppp pap sent-username XXXXXXXXXX password 7 XXXXXXXXXXXXX
> !
> ip nat inside source list 1 interface BRI0 overload
> no ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer0
> !
> access-list 1 permit 0.0.0.0 255.255.255.0
> dialer-list 1 protocol ip permit
> !
> line con 0
>  transport input none
>  stopbits 1
> line vty 0 4
>  password cstm
>  login
> !
-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

I would rather have a German division in front of me than a French one 
behind me."
--- General George S. Patton




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65344&t=65315
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to