I basically follow the article on PBase to the
letter...http://www.pbase.com/mainecruising/rebedding_hardware
---------- Original Message ----------
From: Kevin Driscoll via CnC-List <cnc-list@cnc-list.com>
To: "C&C List" <cnc-list@cnc-list.com>
Subject: Stus-List Re-Bedding / Filling & Drilling w_Epoxy
Date: Fri, 8 Aug 2014 08:41:55 -0700
Happy weekend all,
I am going to start re-bedding some hardware on our boat. I’m going with
butyl tape, but wanted to see what folks were using for “filling and
drilling” holes in the deck/core with epoxy, etc. Is Git Rot appropriate
for this job? I am looking for something easy to work with for when I have a
spare hour or two, i.e. less mixing/disposing cleanup the better.
Send suggestions and / or links to YouTube videos or other “How To”
sites.
Thanks,
Kevin
30-2
PDX
Kevin Driscoll
Portland, Oregon
503 // 875 // 3493
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com