Kevin, I'd use West Six/10 epoxy cartridges. Easy to work with and no waste except for what is left in the tip. Buy lots of tips if you are doing it over several weeks. I don't know if GitRot is strong enough.
Joel 35/3 Annapolis On Fri, Aug 8, 2014 at 11:41 AM, Kevin Driscoll via CnC-List < cnc-list@cnc-list.com> wrote: > Happy weekend all, > > > > I am going to start re-bedding some hardware on our boat. I’m going with > butyl tape, but wanted to see what folks were using for “filling and > drilling” holes in the deck/core with epoxy, etc. Is *Git Rot* > appropriate for this job? I am looking for something easy to work with for > when I have a spare hour or two, i.e. less mixing/disposing cleanup the > better. > > > > Send suggestions and / or links to YouTube videos or other “How To” sites. > > > > Thanks, > > Kevin > > 30-2 > > PDX > > > Kevin Driscoll > Portland, Oregon > 503 // 875 // 3493 > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com