Kevin, The epoxy cartridges are nice and easy to use, but to do the job right one should wet out the hole with un-thickened epoxy before filling with thickened epoxy. Also, don't just fill an existing bolt hole. Over dill the hole and ream back any coring.
That said, I prefer to mix the epoxy myself. First un-thickened for wetting out, then adding some colloidal silica to thicken for the filling via a syringe. For epoxy, I use either West System 105/205 or East System 1032/833. They are near identical except East costs 1/3 less. - Paul E. 1981 C&C Landfall 38 S/V Johanna Rose Carrabelle, FL On Aug 8, 2014, at 11:51 AM, cnc-list-requ...@cnc-list.com wrote: > Date: Fri, 8 Aug 2014 11:46:16 -0400 > From: Joel Aronson <joel.aron...@gmail.com> > To: Kevin Driscoll <kevindrisc...@gmail.com>, "cnc-list@cnc-list.com" > <cnc-list@cnc-list.com> > Subject: Re: Stus-List Re-Bedding / Filling & Drilling w_Epoxy > Message-ID: > <cael16p_z-clsxxvuvgysgb6fr6f-htsqnwb82f99ln6gvr2...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Kevin, > > I'd use West Six/10 epoxy cartridges. Easy to work with and no waste > except for what is left in the tip. Buy lots of tips if you are doing it > over several weeks. I don't know if GitRot is strong enough. > > Joel > 35/3 > Annapolis > > > On Fri, Aug 8, 2014 at 11:41 AM, Kevin Driscoll via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Happy weekend all, >> >> >> >> I am going to start re-bedding some hardware on our boat. I?m going with >> butyl tape, but wanted to see what folks were using for ?filling and >> drilling? holes in the deck/core with epoxy, etc. Is *Git Rot* >> appropriate for this job? I am looking for something easy to work with for >> when I have a spare hour or two, i.e. less mixing/disposing cleanup the >> better. >> >> >> >> Send suggestions and / or links to YouTube videos or other ?How To? sites. >> >> >> >> Thanks, >> >> Kevin >> >> 30-2 >> >> PDX >> >> >> Kevin Driscoll >> Portland, Oregon >> 503 // 875 // 3493 >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com